3Com 3CRWDR101A-75-US User Guide - Page 63
Routing Mode over ATM RFC 1483 Routed Mode, Enter the IP address
UPC - 662705500058
View all 3Com 3CRWDR101A-75-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Internet Settings 61 Routing Mode over ATM (RFC 1483 Routed Mode) This mode is commonly used with either dynamic or static IP addressing. In this mode the WAN ADSL port will be configured with an IP address provided by the ISP. To configure the settings correctly, you should obtain the information on this screen from your ISP. Figure 48 Routing Mode over ATM Screen 1 Select Routing Mode over ATM from the Protocol drop-down menu. 2 Enter the IP address, Subnet Mask and Default Gateway information provided by your ISP into the IP address, Subnet Mask and Default Gateway fields. 3 Check the DNS Automatic from ISP checkbox, if your ISP automatically configure DNS. However, if you need to configure DNS manually, enter the IP address in the DNS Address field. (If your ISP uses a secondary DNS, enter the IP address in the Secondary DNS Address field). 4 Enter the host name in the Host Name filed. 5 If your ISP uses DHCP to automatically assign IP addresses, check the DHCP Client checkbox. 6 Enter the VPI and VCI parameters provided to you by your ISP in the VPI and VCI fields. You can click Auto Search to automatically find out this information. 7 Select the encapsulation type (LLC or VC MUX) in the Encapsulation field. This information should be provided to you by your ISP.