3Com 3CRWE915075 User Guide - Page 18
Networks without a DHCP Server, and start the 3Com Wireless Infrastructure Device Manager
UPC - 662705537740
View all 3Com 3CRWE915075 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
14 Networks without a DHCP Server After you determine the AP's IP address, you can enter that IP address into a web browser on a computer on the same subnet to view the Access Point's system status or change its configuration. Networks without a DHCP Server If your network does not have a DHCP server, the Access Point uses a factory assigned IP address (169.254.2.111). You can use that IP address to configure the Access Point, or you can assign a new IP address to the Access Point. To verify that the Access Point is using the default IP address assigned at the factory: 1 Connect a computer directly to the Access Point using the supplied standard Category 5 UTP Ethernet cable. 2 Enter the Access Point's default IP address (169.254.2.111) into the computer's web browser. If the Configuration Management System starts, the Access Point is using the factory assigned IP address. You can configure the Access Point with the following login information: ■ Login name: admin ■ Password: password If the Configuration Management System does not start, the Access Point is on a different subnet than the computer. Install and start the 3Com Wireless Infrastructure Device Manager to discover the Access Point's IP address.