3Com 3CXFE575CT User Guide - Page 25
Setup for Windows NT 4.0, Before You Begin Installation, Setup Procedure
UPC - 662705312057
View all 3Com 3CXFE575CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
5 SETUP FOR WINDOWS NT 4.0 Before You Begin Installation The Windows NT setup procedure you use depends on whether networking has already been installed on your notebook. Before setting up the PC Card, you will need to know: I Your network file server name, network account user name, and password. I The protocol used in the Microsoft Windows network (NWLink IPX/SPX compatible transport, TCP/IP protocol, NetBEUI protocol). I The name of the NT server domain or workgroup to which you belong. I Your IP address (unless you are using DHCP). I If you are installing with Card and Services Block software, see the "Installing with Softex" section in this chapter. I For unattended installation, see the \unattend\nt4 directory on your Installation CD. Setup Procedure Setup With No Networking Installed 1 Insert the PC Card as described in "Installing the PC Card". 2 Turn the notebook on. 3 Double-click My Computer, double-click Control Panel, double-click Network. 4 Click Yes when the system prompts: "Windows NT Networking is not installed. Do you want to install it now?. This opens the Network Setup Wizard. If this message does not appear, go to Windows NT 4 with networking Installed and follow the instructions. 5 Check Wired to the network and click Next. 6 Click Select from list... when the system prompts to have setup start searching for a network adapter. 7 Click Have Disk. 8 Insert the LAN Installation Disk in the floppy drive or the LAN Installation CD in the CD-ROM drive (and enter the path to the drive, for example, d:\) and click OK. 9 Select FE575C-3Com 10/100 LAN CardBus-Fast Ethernet when the Select OEM Option window opens, and click OK.