ASRock C621A WS User Manual - Page 44
UEFI Setup Utility
View all ASRock C621A WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 3 UEFI Setup Utility 3.1 Introduction This section explains how to use the UEFI SETUP UTILITY to configure your system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer. Please press or during the Power-On-Self-Test (POST) to enter the UEFI SETUP UTILITY; otherwise, POST will continue with its test routines. If you wish to enter the UEFI SETUP UTILITY after POST, restart the system by pressing + + , or by pressing the reset button on the system chassis. You may also restart by turning the system off and then back on. Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen. 3.1.1 UEFI Menu Bar The top of the screen has a menu bar with the following selections: Item Main Advanced Server Mgmt Security Boot Event Logs Exit Description To set up the system time/date information To set up the advanced UEFI features To manage the server To set up the security features To set up the default system device to locate and load the Operating System For event log configuration To exit the current screen or the UEFI SETUP UTILITY Use < > key or < > key to choose among the selections on the menu bar, and then press to get into the sub screen. English 38