Acer PREDATOR X32 FP User Manual - Page 32

English • USB Port Select: Selects the upstream port (B-Type / C-Type). Default: C-Type. Note: You need to connect the monitor to your computer using the corresponding USB cable after selecting the upstream port. • Max Refresh Rate: Configures the monitor's maximum refresh rate (144Hz / 160Hz). Default: 160Hz. • USB 3.0: Configures the data transmission speed of the USB Type-C port at the bottom side of the rear panel (Off / On). Default: Off. Note: 1. If USB 3.0 is set to Off, the transmission speed of the USB Type-C port will be downgraded to the USB 2.0 specification, which allows the DP Alt (DisplayPort Alternate) mode to support resolution 3840x2160 @160Hz. 2. If USB 3.0 is set to On, the transmission speed of the USB Type-C port will comply with the USB 3.0 specification and the DP Alt mode can support resolution 3840x2160 @60Hz. • HDMI 2.1: Enables/Disables the HDMI 2.1 specification (Off / On). Default: On. • DSC: Enables/Disables the Display Stream Compression function (Off / On). Default: On. Note: The monitor's Display Stream Compression function only supports the DP and USB Type-C port. • Power-off USB Charge: Enables/Disables the power charging function of the USB port (Off / On). Default: Off. Note: 1. If Power-off USB Charge is set to Off, when the monitor is powered off, you cannot charge your devices using the USB port. 2. When Power-off USB Charge is set to Off, the sleep mode cannot be resumed via the USB Type-C input. The user needs to set Power-off USB Charge to On. 22