Actiontec ScreenBeam Pro Business Edition User Manual - Page 37
Setting up Network Information Display on TV Screen
View all Actiontec ScreenBeam Pro Business Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
6. After a while, the screensaver image will be updated. You can check it on the connected display when the screensaver is running. 5.3.15. Setting up Network Information Display on TV Screen Follow the procedure below to set up the receiver's network information display: 1. Go to the Network Settings tab page by clicking the Network Settings tab. 2. To enable/disable the Show network information on TV screen feature, go to the Show network information on TV screen line, and set the feature to Enable or Disable. Note: By default, this feature is disabled, that is network information is not displayed. 3. Click the Apply button, and then click OK on the pop-up message box to confirm. After the network information display is enabled, network information is shown on the TV screen. 34