Actiontec ScreenBeam Pro Business Edition User Manual - Page 42

Setting up Wireless Network Parameters

Page 42 highlights

4. The receiver reboots, and new settings take effect after the reboot. 5.3.20. Setting up Wireless Network Parameters When AGO is disabled, you can define wireless network parameters for local management web server, including wireless network name (SSID) and password, IP address, and subnet mask. 1. Go to the Network Settings tab page by clicking the Network Settings tab. 2. Go to the Wireless Interface Settings section, and properly configure the network parameters. Wireless Network Name (SSID) and Wireless Network Password: The SSID and password for accessing the receiver's wireless network. The SSID is displayed when AGO is disabled. Wireless IP Address: It is the IP address of the local management web server. This IP 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

39
4.
The receiver reboots, and new settings take effect after the reboot.
5.3.20.
Setting up Wireless Network Parameters
When AGO is disabled, you can define wireless network parameters for local management
web server, including wireless network name (SSID) and password, IP address, and subnet
mask.
1. Go to the
Network Settings
tab page by clicking the
Network Settings
tab.
2. Go to the
Wireless Interface Settings
section, and properly configure the network
parameters.
°
Wireless Network Name (SSID)
and
Wireless Network Password
: The SSID and
password for accessing the receiver’s wireless network. The SSID is displayed when
AGO is disabled.
°
Wireless IP Address
: It is the IP address of the local management web server. This IP