Actiontec ScreenBeam Pro Business Edition User Manual - Page 45
Resetting the Receiver to Default
View all Actiontec ScreenBeam Pro Business Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Click OK on the pop-up message box to confirm. 5.3.23. Resetting the Receiver to Default Follow the procedure below to reset the receiver to the default settings: 1. Go to the Maintenance tab page by clicking the Maintenance tab. 2. Click the Yes button next to "Reset Settings to Factory". 3. Click OK on the pop-up message box to confirm. 4. The receiver reboots, and the receiver is reset to factory defaults after the reboot. Note: You can also reset your receiver to default by pressing the "Reset" button. Follow the procedure below to restore the Receiver's default factory settings: 1. Power on the Receiver, and wait until the "Ready to connect" screen appears. 2. Hold down the Receiver's "Reset" button with a pin. 3. When the "Reset to Default" screen appears on the HDTV, release the "Reset" button. 42