Actiontec ScreenBeam Pro Business Edition User Manual - Page 44
Rebooting the Receiver
View all Actiontec ScreenBeam Pro Business Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
3. Click the Apply button, and then click OK on the pop-up message box to confirm. 4. The receiver reboots, and the new SSID takes effect after the reboot. 5.3.22. Rebooting the Receiver Follow the procedure below to reboot the receiver: 1. Go to the Maintenance tab page by clicking the Maintenance tab. 2. Click the Yes button next to "Reboot Receiver". 41
41
3.
Click the
Apply
button, and then click
OK
on the pop-up message box to confirm.
4.
The receiver reboots, and the new SSID takes effect after the reboot.
5.3.22.
Rebooting the Receiver
Follow the procedure below to reboot the receiver:
1. Go to the
Maintenance
tab page by clicking the
Maintenance
tab.
2. Click the
Yes
button next to “
Reboot Receiver
”.