Alpine INE-W927HD Quick Reference Guide - Page 67
Setup Operation, General Setup, General Setup Operation, Language Setting
View all Alpine INE-W927HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Setup Setup Operation Touch the [SETUP] icon on the Audio/Visual Playback screen to display the Setup main screen. [SETUP] icon 2 Touch [General]. The General Setup screen appears. 3 Select the desired item. General Setup General Setup Operation To display the General Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the General mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the General mode screen." The following steps 1 to 5 are common operations to each "Setting item" of General Setup. Refer to each section for details. 1 Touch [Setup] icon of Top banner. The Setup main screen is displayed. Setting items: Language / Remote Sensor / Top/Bottom Banner Fade Out / Screen/LED Customize / Visual / About / Installation • Depending on the item, repeat step 3. 4 Touch [ ] or [ ] etc., to change its setting. • When the pop-up window for setup is displayed, touch [ ] to close the window after setting. 5 Touch [ ] to return to the previous screen. • Immediately after changing the settings of General Setup (While the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. Language Setting [Language] is selected on the General setup menu in step 3. Refer to "General Setup Operation" (page 39). Setting the Scroll Scroll display is available if CD text, folder name, file name or tag information is entered. Setting item: Auto Scroll Setting contents: Off (Initial setting) / On Off: Turns off the scroll mode. On: Turns on the Auto scroll mode. Scroll display is repeated as long as the mode is turned on. 39-EN