Ariens Deluxe Track 28 Owners Manual - Page 27

Remote Deflector Control, 017, 018, 020, 022, 023, Discharge Chute Control

Get Ariens Deluxe Track 28 PDF manuals and user guides View all Ariens Deluxe Track 28 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

5. Check function of remote wheel lock. If wheel lock does not function properly, remove bottom cover to check cable slack. 6. Repeat steps 2 - 4 while watching cable to remove slack. 7. Check function of remote wheel lock. If wheel lock does not function properly, take the unit to Dealer for repairs. 3 1 No Slack 2 OS7170 1. Top Jam Nut 2. Bottom Jam Nut 3. Cable Adjuster Figure 28 REMOTE DEFLECTOR CONTROL (921013, 017, 018, 020, 022, 023) (Figure 29) Deflector must stay in selected position while throwing snow. If deflector does not stay in set position: 1. Tighten nut beneath control panel to increase pressure on deflector control. If deflector does not follow full range of travel: 1. Push deflector remote all the way forward. 2. Loosen adjusting nuts on cable support bracket underneath the dash panel (Figure 29). 3. To adjust the deflector lower: Slide cable down. Tighten bottom nut. 4. To adjust deflector higher: Slide cable up. Tighten top nut. 5. Check travel and repeat adjustment as necessary. 1 2 1. Adjusting Nuts 2. Cable Support Bracket Figure 29 OS7175 DISCHARGE CHUTE CONTROL (921017, 018) (Figure 30) If chute does not stay in position while throwing snow or if chute does not rotate freely, adjust the cable under the gear cover so the chute lock fingers engage or disengage the locking gear. If chute does not stay in position: Loosen the cable by loosening the rear adjustment nut, and then tightening the forward adjustment nut against the bracket until the lock arm engages the gear teeth (Figure 30). 1. Forward Adjustment Nut 2. Rearward Adjustment Nut Figure 30 OS7181 GB - 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
GB - 27
5. Check function of remote wheel lock. If
wheel lock does not function properly,
remove bottom cover to check cable
slack.
6. Repeat steps 2 – 4 while watching cable
to remove slack.
7. Check function of remote wheel lock. If
wheel lock does not function properly,
take the unit to Dealer for repairs.
REMOTE DEFLECTOR CONTROL
(921013, 017, 018, 020, 022, 023)
(Figure 29)
Deflector must stay in selected position while
throwing snow.
If deflector does not stay in set position:
1. Tighten nut beneath control panel to
increase pressure on deflector control.
If deflector does not follow full range of travel:
1. Push deflector remote all the way
forward.
2. Loosen adjusting nuts on cable support
bracket underneath the dash panel
(Figure 29).
3. To adjust the deflector lower:
Slide cable down. Tighten bottom nut.
4. To adjust deflector higher:
Slide cable up. Tighten top nut.
5. Check travel and repeat adjustment as
necessary.
DISCHARGE CHUTE CONTROL
(921017, 018)
(Figure 30)
If chute does not stay in position while
throwing snow or if chute does not rotate
freely, adjust the cable under the gear cover
so the chute lock fingers engage or
disengage the locking gear.
If chute does not stay in position:
Loosen the cable by loosening the rear
adjustment nut, and then tightening the
forward adjustment nut against the bracket
until the lock arm engages the gear teeth
(Figure 30).
Figure 28
1.
Top Jam Nut
2.
Bottom Jam Nut
3.
Cable Adjuster
1
2
No Slack
OS7170
3
Figure 29
2
1
1.
Adjusting Nuts
2.
Cable Support Bracket
OS7175
1. Forward
Adjustment Nut
2. Rearward
Adjustment Nut
Figure 30
OS7181