Asus A7S-VM A7S-VM User Manual - Page 30

ASUS A7S-VM User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, IMPORTANT, Wake-On-Ring Connector 2-

Get Asus A7S-VM PDF manuals and user guides View all Asus A7S-VM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

3. H/W SETUP Connectors 3. HARDWARE SETUP 4) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: To use this feature, enable the Wake-On-LAN feature in BIOS (see 4.5.1 Power Up Control) and make sure that system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON +5 Volt Standby PME A7S-VM A7S-VM Wake-On-LAN Connector Ground 5) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that the Power Up On External Modem Act parameter is enabled (see 4.5.1 Power Up Control) and that the system has an ATX power supply with at least 720mA +5V standby power. WOR 2 Ring# Ground 1 A7S-VM A7S-VM Wake On Ring Connector 30 ASUS A7S-VM User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
30
ASUS A7S-VM User’s Manual
3. HARDWARE SETUP
Connectors
3. H/W SETUP
4)
Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output, such as
the ASUS PCI-L101 Ethernet card (see
7. Appendix
). The connector powers up
the system when a wakeup packet or signal is received through the LAN card.
IMPORTANT:
To use this feature, enable the Wake-On-LAN feature in BIOS
(see
4.5.1 Power Up Control
) and make sure that system has an ATX power
supply with at least 720mA +5V standby power.
A7S-VM Wake-On-LAN Connector
IMPORTANT:
Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
PME
Ground
WOL_CON
A7S-VM
5)
Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card.
NOTE:
For external modems, Wake-On-Ring
is detected through the COM port.
IMPORTANT:
This feature requires that the
Power Up On External Modem
Act
parameter is enabled (see
4.5.1 Power Up Control
)
and that the system has
an ATX power supply with at least 720mA +5V standby power.
Ring#
Ground
2
1
A7S-VM
A7S-VM Wake On Ring Connector
WOR