Asus AP160R-S User Guide - Page 31
Installing CD-ROM and floppy drives
View all Asus AP160R-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.9 Installing CD-ROM and floppy drives The slim-type CD-ROM drive and slim-type floppy drive are contained in an external combo drive cage. You will need these drives when installing the drivers, utilities, and software applications. The drives are not hot-swappable so you should install them before powering up the system. However, you can detach the cage from the chassis when you do not need it anymore. No need to shut down the system. NOTE The combo drive cage and drives are NOT standard shipping items in the AP160R-S system package. These items are sold separately. 1. When shipped, the rails of the combo drive cage are attached to the sides as shown. Remove the screw closer to the front and set it aside. Remove this screw 2. Loosen the other screw closer to the rear side. Do not remove the screw completely. Loosen this screw 3. Turn the rail 180 degrees. The screw hole on the rail should align to the hole on the side of the cage. 4. Secure the rail with the screw that you removed earlier. Tighten the other screw. ASUS AP160R-S 1U Rackmount Server 31