Asus AP1720-E2 AP1720-E2 English version manual - Page 28

installed CPU, making sure

Get Asus AP1720-E2 PDF manuals and user guides View all Asus AP1720-E2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

To install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, making sure that the four screws on the heatsink align with the screw holes on the CEK spring. The CEK springs come pre-installed under the CPU sockets to support the weight of the CPU heatsinks. It is recommended that you keep the springs installed to prevent motherboard breakage. 2. Use a Phillips screwdriver to tighten the four heatsink screws in a diagonal sequence. 4 2 1 3 3. Connect the fan cable to the 4-pin connector labeled CPU_FAN1. CPU1 fan connector (CPU_FAN1) 2-8 Chapter 2: Hardware setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
Chapter 2:
Hardware setup
2-8
2.
Use a Phillips screwdriver to
tighten the four heatsink screws
in a diagonal sequence.
3.
Connect the fan cable to the 4-pin
connector labeled CPU_FAN1.
1
3
4
2
CPU1 fan connector
(CPU_FAN1)
To install the CPU heatsink and fan:
1.
Place the heatsink on top of the
installed CPU, making sure that
the four screws on the heatsink
align with the screw holes on the
CEK spring.
The CEK springs come pre-installed under the CPU sockets to support
the weight of the CPU heatsinks. It is recommended that you keep the
springs installed to prevent motherboard breakage.