Asus AP1720-E2 AP1720-E2 English version manual - Page 52
Back side
View all Asus AP1720-E2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Back side The back side of SATA backplane faces the rear panel when installed. This side includes the power connectors, SATA interfaces for the SATA RAID card, and SMBus connectors. Fan connector (for HDD fan) Power connectors (connect power plugs from the power supply) SMBus connector (upper 6-1 pins) (connects the SMB cable from the motherboard) Power SMBus connector (lower 6-1 pins) (connects the SMB cable from the power supply, when available) CON2 CON4 CON6 CON8 The back side SATA connectors are attached to the motherboard SATA connectors via the supplied SATA cables. Refer to the illustration on the right for the location of the SATA connectors. Refer to the table below for the default SATA cable connections. Backplane Connected to Controlled ID (on motherboard) by CON2 CON4 CON6 CON8 SATA_RAID1 Promise® 20319 SATA_RAID2 Promise® 20319 SATA_RAID3 Promise® 20319 SATA_RAID4 Promise® 20319 SATA RAID controller SATA_RAID4 SATA_RAID3 SATA_RAID2 SATA_RAID1 2-32 Chapter 2: Hardware setup