Asus AP200 Hardware Reference - Page 21
Device Cage
View all Asus AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
IV. Hardware Setup 4-3. 3.5" Device Cage Before hard or floppy disk drives can be installed or removed from the 3.5" device cage, you must remove the device cage from the chassis. 3.5" Device Cage Removal Procedure 1. Remove the stabilizing link bar, if not already removed. 2. Rotate the locking lever clockwise using a screwdriver inserted from the top of the lever. (You must pull the lever outward first before turning it.) 3. Slide backward to remove the 3.5" device cage. To mount the 3.5" device cage, use the reverse procedure. (Locking the lever is possible with your fingers.) Locking Lever IV. HW Setup 3.5" Device Cage Unlocking the 3.5" device cage Floppy Disk Drive Mounting The 3.5" device cage has a slot and three screw holes on each side for a 3.5" floppy device on the top most space. The floppy must be aligned so that the first hole matches. Align this Hole. 1.44MB Floppy Disk Drive Mounted in the 3.5" Device Cage AP200 Hardware Reference Guide 21