Asus AP2300 AP2300 Server in English - Page 16

3. Basic Operation Startup/LEDs 3. Basic Operation • 3-1 Starting the Server Turn ON the server by pushing the power button. If the Power On LED does not light, make sure the power cord is connected to the system unit and to a working grounded outlet. IMPORTANT The power switch only turns off DC power (power supply output). To turn off AC power (power supply input), you need to unplug the electrical cord from the outlet. • 3-2 LEDs There are two LEDs on the top right-hand corner of the front panel. The upper one is the power LED and the lower one is the hard drive access LED. When the system is booted, the power LED is green. When the hard drive is being accessed, the hard drive access LED is green. Power LED Power Button Hard Drive Access LED LEDs • 3-3 BIOS Setup This server does not come with any pre-installed software. When booting your server for the first time, make BIOS settings by following the motherboard User's Manual. 16 AP2300 Reference Guide