Asus AP2300 AP2300 Server in English - Page 9

1.1I.nItrnFtoerdaotuducruteictsoinon 1. Introduction • 1-3 Features The AP2300 is configured on the ASUS CUR-DLS smart motherboard which uses the ServerSetTM chipset from ServerWorks®, supporting dual Pentium III processors and 133MHz Front Side Bus in order to accelerate even the most complicated server tasks. The following are highlights to this server's many features. For additional features and details, read the motherboard User's Manual included with this server package. Motherboard: ASUS CUR-DLS • Processor: Dual Intel® Pentium III FC-PGA processors running at 133MHz or 100MHz Front Side Bus. • Memory: Four 168-pin DIMM sockets for 16MB-4GB PC133 registered SDRAM with ECC support. • Onboard SCSI (optional): LSI® Ultra160/Ultra2-Wide SCSI controller to support up to 30 SCSI devices on dual channels. • Onboard LAN: Intel® 82559 Fast-Ethernet LAN controller. • Onboard VGA: ATI® Rage XL VGA controller with 4MB PC100 SDRAM to support one VGA connector and one DFP (Digital Flat Panel) connector. • Super Multi-I/O: Two PCI Bus Master IDE Ports with Ultra DMA/33 support, one floppy, two serial COM ports, one parallel port, one PS/2 keyboard, one PS/2 mouse, one RJ-45 LAN port, two USB ports, and one IrDA connector. • Expansion Slots: Six or seven PCI slots (33 or 66MHz, depending on model), and one ASMC slot for IPMI (Intelligent Platform Management Interface) compliant management solution. Chassis: AS-30 • Chassis: Tower server chassis with rack-mount rail tracks. • Backplane: Wide-SCSI backplane board with LVDS support, remote SCSI ID DIP switches and power to support 5 SCSI SCA hard drives. • Power: ATX 300W redundant power supply with optional standard 400W power supply. • Device Bays: Support for one 3.5inch floppy device, three 5.25inch devices, five hot-swappable hard disk drives in removable aluminum trays. AP2300 Hardware Reference Guide 9