Asus AP8000 Hardware Reference - Page 21
Install Cartridge, Lifters, Install Retention, Mechanism Cap, Mechanism, Frame
View all Asus AP8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
IV. Hardware Setup Install Cartridge Lifters Each Xeon processor requires two lifters in order to allow safe removal of the processor. The lifters clamp onto the top holes on the cartridge corners. There is a left and a right side for the lifters. The left side has a single dot and the right side has two dots (when holding the motherboard with the ATX connectors to the left). Single Dot Install Retention Mechanism Cap The cap must first be installed from the left side (with the ATX connectors to the left). The left side has one dot, while the right side has two dots. The right end of the cap enters the retention mechanism and a click is heard as it snaps into place. Two Dots One Dot Install Retention Mechanism Frame A metal frame is used accross both retention mechanisms. After installing the frame, four captive nuts should be tightened on the feet of the frame to the screws protruding from the re- tention mechanisms. IV. Hardware Setup CPU Sticker faces the CPU fan AP8000 Hardware Reference Guide 21