Asus AP8000 Hardware Reference - Page 9

I. Introduction Features I. Introduction • 1-3. Features AP8000 is a corporate server configured on the XG-DLS smart motherboard which uses the 440GX chipset from Intel and supports two Pentium® III/II XeonTM processors and 100MHz front side bus in order to handle even the most complicated server tasks.The following are highlights to this server's many features. For additional features and details, read the motherboard User's Manual included with this server package. • Processor: Supports dual Intel® Pentium® III Xeon™ processors (500MHz and faster) and Pentium ® II Xeon™ (400MHz to 450MHz) processors for extreme processing speeds. • Memory: Equipped with four DIMM sockets to support up to 2GB SDRAM with ECC. • AGP Slot: Supports Accelerated Graphics Port cards for high performance, component level interconnect targeted at 3D graphical display applications. Using AGP will also free up a PCI slot. • Adaptec SCSI Chipset: Features Adaptec AIC-7896 dual-channel Ultra2 SCSI chipset that supports any combination of 50-pin narrow or 68pin wide/ultra2 devices through the onboard 50-pin and 68-pin SCSI connectors. Please refer to the SCSI cable limits in the appendix. • Device Bays: Support one floppy, one CD-ROM, two additional fixed devices, and eight hot-swap hard disk drives. • SCSI Backplane: Ultra2 SCSI backplane with remote SCSI ID dip switches and power to support up to 8 Ultra2 SCSI hard disk drives. • Onboard LAN: Onboard Intel 10/100Base-TX Fast Ethernet. • Onboard IDE: Up to 33MB/sec IDE transfer with UltraDMA/33. • Onboard Hardware Monitor: Provides information for system and processor voltages, fan status, temperature, chassis intrusion, and provides automatic system restart. • SNMP Agent and Intel LDSM: Provides server monitoring, management, and control. • RAID Controller: Supports PCI-DA2100 (UW), PCI-DA2200 (U2), or DA3000 (SCSI-SCSI U2) to provide fault tolerant storage. AP8000 Hardware Reference Guide 9