Asus Blitz Formula Blitz Formula user's manual E3151 English Edition - Page 27

2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them. • Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. • Before you install or remove any component, ensurethat the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. Onboard LEDs The motherboard comes with LEDs that indicate the voltage conditions of CPU, memory, northbridge, southbridge, and FSB frenquency. You may adjust the voltages in BIOS. There are also an LED for hard disk drive activity and an onboard switch for power status. For more information about voltage adjustment, refer to 4.4 Extreme Tweaker menu. 1. CPU LED Refer to the illustration below for the location of the CPU LED and the table below for LED definition. ® CPU_CRAZY CPU_HIGH CPU_NORMAL BLITZ FORMULA BLITZ FORMULA CPU LED CPU Voltage Normal (green) 1.10000~1.50000 High (yellow) 1.51250~1.69375 Crazy (red) 1.70000~1.90000 ROG Blitz Formula 2-