Asus Blitz Formula Blitz Formula user's manual E3151 English Edition - Page 89
AHCI Configuration, Hard Disk Write Protect [Disabled], IDE Detect Time Out Sec [35]
View all Asus Blitz Formula manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI]. Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be effective only if device is accessed through BIOS. Confiuration option: [Disabled] [Enabled] IDE Detect Time Out (Sec) [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4.3.7 AHCI Configuration This menu allows you to configure AHCI settings. It appears only when you set the Configure SATA as item to [AHCI] in the SATA Configuration menu. AHCI Settings AHCI Port1 [Not Detected] AHCI Port2 [Not Detected] AHCI Port3 [Not Detected] AHCI Port4 [Not Detected] AHCI Port5 [Not Detected] AHCI Port6 [Not Detected] While entering setup, BIOS auto detects the presence of SATA devices. This displays the status of auto detection of SATA devices. ACHI Port1~6 [XXXX] Displays the status of auto-detection of IDE devices. AHCI Port1 Device :Not Detected SATA Port1 [Auto] Select the type of devices connected to the system. SATA Port1 [Auto] Allows you to select the type of device connected to the system. Configuration options: [Auto] [Not Installed] ROG Blitz Formula 4-15