Asus Blitz Formula Blitz Formula user's manual E3151 English Edition - Page 64
Digital audio connector 4-1 pin SPDIF_OUT for ASUS HDMI VGA card
View all Asus Blitz Formula manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
• For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 400 W. • Do not forget to connect the 4-pin/8pin EATX12V power plug; otherwise, the system will not boot. • Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • The ATX 12 V Specification 2.0-compliant (400W) PSU has been tested to support the motherboard power requirements with the following configuration: CPU: Intel® Pentium® Extreme 3.73GHz Memory: 512 MB DDR2 (x4) Graphics card: ASUS EAX1900XT Parallel ATA device: IDE hard disk drive Serial ATA device: SATA hard disk drive (x2) Optical drive: DVD-RW • If you want to use two high-end PCI Express x16 cards, use a PSU with 500W to 600W power or above to ensure the system stability. 10. Digital audio connector (4-1 pin SPDIF_OUT for ASUS HDMI VGA card) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). If you are using an ASUS HDMI-equipped graphics card, connect the HDMI card to this connector with a S/PDIF Out cable. SPDIF_OUT GND SPDIFOUT +5V BLITZ FORMULA BLITZ FORMULA Digital audio connector The ASUS HDMI-equipped graphics card and the S/PDIF Out cable are purchased separately. ® 2-38 Chapter 2: Hardware information