Asus Blitz Formula Blitz Formula user's manual E3151 English Edition - Page 53

Jumper, clr CMOS switch behavior

Get Asus Blitz Formula PDF manuals and user guides View all Asus Blitz Formula manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

2.6 Jumper 1. Clear RTC RAM (3-pin CLRTC_SW) This jumper allows you to enable the clr CMOS switch. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The clr CMOS switch on the back I/O helps you easily to clear the system setup information such as system passwords. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Press down the clr CMOS switch. 3. Plug the power cord and turn ON the computer. 4. Hold down the key during the boot process and enter BIOS setup to re-enter data. Removing the cap will cause system boot failure! ® CLRTC_SW 12 23 BLITZ FORMULA Disable CLR_CMOS Enable CLR_CMOS (Default) BLITZ FORMULA Clear RTC RAM clr CMOS switch behavior System power state G3* S5* S0 (DOS mode) S0 (OS mode) S1 S3 S4 Clearing CMOS ** *G3: Power off without +5VSB power (AC power loss); S5: Power off with +5VSB power **The system shuts dowm immediately. • The clr CMOS switch will not function if the jumper cap on CLRTC_SW is moved to the Disable position, but the shutdwon function in S0 mode (DOS mode) still works. • Make sure to re-enter your previous BIOS settings after you clear the CMOS. • You do not need to clear the RTC when the system hangs due to CPU overclocking. With the C.P.R. (CPU Parameter Recall) feature, shut down and reboot the system so the BIOS can automatically reset CPU parameter settings to default values. If the system hangs due to overclocking of memory timing or chipset voltage and the power button fails to function, pressing down the clr CMOS switch will shut down the system and clear CMOS simultaneously. ASUS Blitz Formula 2-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
ASUS Blitz Formula
2-27
2.6
Jumper
1.
Clear RTC RAM (3-pin CLRTC_SW)
This jumper allows you to enable the
clr CMOS
switch. You can clear the CMOS
memory of date, time, and system setup parameters by erasing the CMOS RTC
RAM data. The
clr CMOS
switch on the back I/O helps you easily to clear the
system setup information such as system passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Press down the
clr CMOS
switch.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <Del> key during the boot process and enter BIOS setup to
re-enter data.
Removing the cap will cause system boot failure!
BLITZ FORMULA
BLITZ FORMULA Clear RTC RAM
CLRTC_SW
Disable CLR_CMOS
12
23
Enable CLR_CMOS
(Default)
clr CMOS switch behavior
System power state
G3*
S5*
S0 (DOS mode)
S0 (OS mode)
S1
S3
S4
Clearing CMOS
**
*G3: Power off without +5VSB power (AC power loss); S5: Power off with +5VSB power
**The system shuts dowm immediately.
•
The
clr CMOS
switch will not function if the jumper cap on CLRTC_SW is
moved to the Disable position, but the shutdwon function in S0 mode (DOS
mode) still works.
•
Make sure to re-enter your previous BIOS settings after you clear the
CMOS.
•
You do not need to clear the RTC when the system hangs due to CPU
overclocking. With the C.P.R. (CPU Parameter Recall) feature, shut down
and reboot the system so the BIOS can automatically reset CPU parameter
settings to default values. If the system hangs due to overclocking of
memory timing or chipset voltage and the power button fails to function,
pressing down the
clr CMOS
switch will shut down the system and clear
CMOS simultaneously.