Asus CUW-FX CUW-FX User Manual - Page 18
ASUS CUWE-FX User's Manual, Onboard Audio Codec Setting CODEC, Onboard AC'97 Audio Con, troller,
View all Asus CUW-FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 1) Onboard Audio Codec Setting (CODEC) available on audio model only The onboard audio CODEC may be enabled or disabled using all of these jumpers. Disable the onboard audio CODEC if you are using a PCI audio card on any of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in this section). If using a PCI audio expansion card, Onboard AC'97 Audio Controller in 4.4.2 I/O Device Configuration must also be disabled. Setting Enable CODEC [1-2] [1-2] [1-2] [1-2] (default) Disable [2-3] [2-3] [2-3] [2-3] SPK AUD_EN1 SPK AUD_EN1 CUW(E)-FX ® 3 3 2 2 1 1 ADN# AUD_EN2 ADN# AUD_EN2 CUW(E)-FX Audio Codec Setting Enable Disable 2) PCI 3 Volt Setting (PCI3VSBSEL) This jumper allows you to select the voltage supplied to PCI devices. If you have PCI devices that require auxiliary power, set this jumper to Enable 3 VSB. Setting +3 VSB +3 Volt PCI3VBSEL [1-2] (default) [2-3] ® CUW(E)-FX CUW(E)-FX PCI 3 Volt Selection PCI3VSBSEL 123 123 +3 VSB +3 Volt 18 ASUS CUW(E)-FX User's Manual