Asus CUW-FX CUW-FX User Manual - Page 40
System Power LED Lead 3-1 pin KEYLOCK
View all Asus CUW-FX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3. HARDWARE SETUP 27) System Power LED Lead (3-1 pin KEYLOCK) This 3-1 pin connector connects the system power LED, which lights when the system is powered on and blinks when it is in sleep mode. 28) Keyboard Lock Switch Lead (2-pin KEYLOCK) This 2-pin connector connects to the case-mounted key switch to allow keyboard locking. 29) System Warning Speaker Connector (4-pin SPEAKER) This 4-pin connector connects to the case-mounted speaker. 30) Reset Switch Lead (2-pin RESET) This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. This is a preferred method of rebooting to prolong the life of the system's power supply. 31) ATX Power Switch Lead (2-pin PWR) The system power is controlled by a momentary switch connected to this lead. Pressing the button once will switch the system between ON and SOFT OFF. Pushing the switch while in the ON mode for more than 4 seconds will turn the system off. The system power LED shows the status of the system's power. 32) System Management Interrupt Lead (2-pin SMI) This allows the user to manually place the system into a suspend mode or "Green" mode, where system activity is decreased to save electricity and expand the life of certain components when the system is not in use. This 2-pin connector connects to the case-mounted suspend switch. Wake-up can be controlled by settings in the BIOS but the keyboard will always allow wake-up (the SMI lead cannot wake up the system). 33) Message LED Lead (2-pin LED) This indicates whether a message has been received from a fax/modem. The LED will remain lit when there is no signal and blink when there is data transfer or waiting in the inbox. This function requires ACPI OS and driver support. Keyboard Lock Power LED Speaker Connector 3. H/W SETUP Connectors +5 V PLED Keylock Ground +5V Ground Ground SPKR +5 V MLED ExtSMI# Ground PWR_SW Ground ResetCon Ground ® CUW(E)-FX Message LED SMI Lead Reset SW ATX Power Switch* * Requires an ATX power supply. CUW(E)-FX System Panel Connectors 40 ASUS CUW(E)-FX User's Manual