Asus CUW-FX CUW-FX User Manual - Page 33

ASUS CUWE-FX User's Manual, Wake-On-LAN Connector 3-pin WOL_CON, IMPORTANT, Wake On LAN, Wake-On-

Get Asus CUW-FX PDF manuals and user guides View all Asus CUW-FX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

3. HARDWARE SETUP 12) Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (not required for onboard LAN model). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. CUW(E)-FX IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON Ground PME +5 Volt Standby CUW(E)-FX Wake-On-LAN Connector 13) Wake-On-Ring Connector (2-pin WOR) This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port. IMPORTANT: This feature requires that PWR Up On Modem Act is set to Enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. ® ® 3. H/W SETUP Connectors CUW(E)-FX WOR RI# Ground 2 1 CUW(E)-FX Wake-On-Ring Connector ASUS CUW(E)-FX User's Manual 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
33
3.
HARDWARE SETUP
Connectors
3.
H/W SETUP
ASUS CUW(E)-FX User’s Manual
12) Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output, such as
the ASUS PCI-L101 Ethernet card (not required for onboard LAN model). The
connector powers up the system when a wakeup packet or signal is received
through the LAN card.
IMPORTANT:
This feature requires that
Wake On LAN
is set to
Enabled
(see
4.5.1 Power Up Control
)
and that your system has an ATX power supply with at
least 720mA +5V standby power.
CUW(E)-FX
CUW(E)-FX Wake-On-LAN Connector
IMPORTANT:
Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
PME
Ground
WOL_CON
13) Wake-On-Ring Connector (2-pin WOR)
This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card.
NOTE:
For external modems, Wake-On-Ring
is detected through the COM port.
IMPORTANT:
This feature requires that
PWR Up On Modem Act
is set to
Enabled
(see
4.5.1 Power Up Control
)
and that your system has an ATX power
supply with at least 720mA +5V standby power.
CUW(E)-FX
CUW(E)-FX Wake-On-Ring Connector
WOR
RI#
Ground
2
1