Home » Asus Manuals » Servers » Asus DSEB-D16 » Manual Viewer

Asus DSEB-D16 DSEB-D16 User's Manual for English Edition - Page 36

System memory, 2.4.1 Overview, 2.4.2 Memory configurations

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

2.4 System memory 2.4.1 Overview The motherboard comes with sixteen fully-buffered DIMM (FB-DIMM) sockets to support 240-pin FB-DIMM modules. An FB-DIMM module has a different pin-out from DDR2 DIMMs so you cannot install DDR2 DIMMs on an FB-DIMM socket. Note that an FB-DIMM socket has an Advanced Memory Buffer (AMB) chip that allows memory-to-CPU connection at gigabit speed. The figure illustrates the location of the FB-DIMM sockets: ® DSEB-D16 Series 240-pin FB-DIMM sockets 128 Pins 112 Pins FB-DIMM_13 FB-DIMM_12 FB-DIMM_11 FB-DIMM_10 FB-DIMM_03 FB-DIMM_02 FB-DIMM_01 FB-DIMM_00 FB-DIMM_20 FB-DIMM_21 FB-DIMM_22 FB-DIMM_23 FB-DIMM_30 FB-DIMM_31 FB-DIMM_32 FB-DIMM_33 2.4.2 Memory configurations You may install 512 MB, 1 GB, 2 GB, 4 GB, and 8 GB registered ECC FB‑DIMMs into the DIMM sockets. • For optimum compatibility, we recommend that you obtain memory modules from the same vendor. Refer to the Qualified Vendors List on the ASUS web site. • The FB-DIMM 800 MHz has to work with the 1600MHz FSB CPU or above; otherwise the memory module downgrades and runs at the speed of 667MHz. • If you are installing only one memory module, install into the white socket labeled DIMM_00. Installing into any other socket will not work. 2-16 Chapter 2: Hardware information

Section	Page
DSEB-D16 Series specifications summary	11
Product introduction	13
1.1 Welcome!	16
1.4 Special features	16
1.4.1 Product highlights	16
1.4.2 Innovative ASUS features	18
Hardware information	19
2.1 Before you proceed	21
2.2 Motherboard overview	23
2.2.1 Placement direction	23
2.2.2 Screw holes	23
2.2.3 Support kits for the motherboard	24
2.2.4 Motherboard layouts	27
2.2.5 Layout contents	29
2.3 Central Processing Unit (CPU)	31
2.3.1 Installing the CPU	31
2.3.2 Installing the CPU heatsink and fan	34
2.4 System memory	36
2.4.1 Overview	36
2.4.2 Memory configurations	36
2.4.3 Memory mirroring and sparing technology	38
2.4.4 Installing a DIMM	44
2.4.5 Removing a DIMM	44
2.4.6 Installing the MemCool FB-DIMM fan (optional)	45
2.4.7 Uninstalling the optional MemCool FB-DIMM fan	47
2.5 Expansion slots	48
2.5.1 Installing an expansion card	48
2.5.2 Configuring an expansion card	48
2.5.3 Interrupt assignments	49
2.5.4 PCI Express 2.0 x16 slots (x16 link)	49
2.5.5 PCI Express x8 slot (x8 link)	49
2.5.6 PCI-X slot (for ZCR slot; DSEB-D16/SAS only)	50
2.5.7 SODIMM socket	51
2.6 Jumpers	52
2.7 Connectors	57
2.7.1 Rear panel connectors	57
2.7.2 Internal connectors	58
Powering up	67
3.1 Starting up for the first time	69
3.2 Turning off the computer	70
3.2.1 Using the OS shut down function	70
3.2.2 Using the dual function power switch	70
BIOS setup	71
4.1 Managing and updating your BIOS	73
4.1.1 Creating a bootable floppy disk	73
4.1.2 AFUDOS utility	74
4.1.3 ASUS CrashFree BIOS 3 utility	77
4.2 BIOS setup program	78
4.2.1 BIOS menu screen	79
4.2.2 Menu bar	79
4.2.3 Navigation keys	79
4.2.4 Menu items	80
4.2.5 Sub-menu items	80
4.2.6 Configuration fields	80
4.2.7 Pop-up window	80
4.2.8 Scroll bar	80
4.2.9 General help	80
4.3 Main menu	81
4.3.1 System Date [Day xx/xx/xxxx]	81
4.3.2 System Time [xx:xx:xx]	81
4.3.3 Floppy A [1.44 MB 3½”]	81
4.3.4 IDE Configuration	82
4.3.5 Primary/Third/Fourth IDE Master/Slave	83
4.3.6 System Information	84
4.4 Advanced menu	86
4.4.1 CPU Configuration	86
4.4.2 Chipset Configuration	88
4.4.3 PCI/PnP Configuration	92
4.4.4 USB Configuration	94
4.4.5 Peripheral Configuration	95
4.4.6 ACPI Configuration	96
4.4.7 Power On Configuration	97
4.4.8 Hardware Monitor	98
4.5 Server menu	100
4.5.1 Remote Access Configuration	100
4.6 Security	102
4.7 Boot menu	104
4.7.1 Boot Device Priority	104
4.7.2 Boot Settings Configuration	105
4.8 Exit menu	106
RAID configuration	109
5.1 Setting up RAID	111
5.1.1 RAID definitions	111
5.1.2 Installing hard disk drives	112
5.1.3 Setting the RAID item in BIOS	112
5.1.4 RAID configuration utilities	112
5.2 LSI Software RAID Configuration Utility	113
5.2.1 Creating a RAID 0 or RAID 1 set	114
5.2.2 Creating a RAID 10 set	120
5.2.3 Adding or viewing a RAID configuration	124
5.2.4 Initializing the logical drives	127
5.2.5 Rebuilding failed drives	132
5.2.6 Checking the drives for data consistency	134
5.2.7 Deleting a RAID configuration	137
5.2.8 Selecting the boot drive from a RAID set	138
5.2.9 Enabling the WriteCache	139
5.3 Intel® Matrix Storage Manager Option ROM Utility	140
5.3.1 Creating a RAID 0 set (Stripe)	141
5.3.2 Creating a RAID 1 set (Mirror)	143
5.3.3 Creating a RAID 10 set (Stripe + Mirror)	144
5.3.4 Creating a RAID 5 set (Parity)	145
5.3.5 Deleting a RAID set	146
5.3.6 Resetting disks to Non-RAID	147
5.3.7 Exiting the Intel® Matrix Storage Manager	147
5.4 Global Array Manager	148
5.5 LSI Logic MPT Setup Utility (DSEB-D16/SAS model only)	149
5.5.1 Integrated Mirroring	149
5.5.2 Integrated Mirroring Enhanced	153
5.5.3 Integrated Striping (IS) volume	155
5.5.4 Managing Arrays	158
5.5.5 Viewing SAS topology	163
5.5.6 Global Properties	165
Driver installation	169
6.1 RAID driver installation	171
6.1.1 Creating a RAID driver disk	171
6.1.2 Installing the RAID controller driver	176
6.2 Intel chipset software installation	183
6.3 LAN driver installation	186
6.3.1 Windows 2000/Server 2003	186
6.3.2 Red Hat	191
6.4 VGA driver installation	192
6.4.1 Windows® 2000/Server 2003	192
6.5 Management applications and utilities installation	194
6.5.1 Running the support CD	194
6.5.2 Drivers menu	194
6.5.3 Management Software menu	195
6.5.4 Utilities menu	195
6.5.5 Contact information	195
Reference information	197
A.1 DSEB-D16/SAS model block diagram	199