Asus DSEB-D16 DSEB-D16 User's Manual for English Edition - Page 54
Intel, 6321ESB SATA port S/W RAID setting 3-pin RAID_SEL1, Fan control setting 3-pin FAN_SEL1
View all Asus DSEB-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4. Fan control setting (3-pin FAN_SEL1, FAN_SEL2) These jumpers allow you to switch for fan pin selection. The FAN_SEL1 jumper is for the CPU fans control and FAN_SEL2 is for the other fans control including front fans, rear fans and FB-DIMM fans. Set to pins 1-2 for 4-pin fans or pins 2-3 for 3-pin fans. ® DSEB-D16 Series FAN setting FAN_SEL1 (CPU Fan) FAN_SEL2 (Other Fans) 12 23 PWM FAN DC FAN (Default) • If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan controll will not work and the fan you installed will always run at full speed. 5. Intel® 6321ESB SATA port S/W RAID setting (3-pin RAID_SEL1) (DSEB-D16 model only) This jumper allows you to select the Serial ATA RAID configuration utility to use when you create disk arrays. Both utilities are supported by the Intel® 6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI Software RAID Configuration Utility (default); otherwise, place the jumper caps on pins 2-3 to use the Intel® Matrix Storage Manager (IMSM). ® DSEB-D16 RAID setting 2-34 RAID_SEL1 12 23 LSI Intel (Default) Chapter 2: Hardware information