Asus E500-CI CUW-RM User Manual - Page 18
H/w Setup
View all Asus E500-CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3. HARDWARE SETUP 1) JumperFree™ Mode Setting (JEN) This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu). NOTE: Set all dip switches (DSW) to OFF for JumperFree™ mode. Setting JEN Disable (Jumper) [1-2] (default) Enable (JumperFree) [2-3] 3. H/W SETUP Motherboard Settings CUW-RM ® 123 DSW ON 12345 123 OFF Jumper Mode JumperFree Mode JEN CUW-RM JumperFree™ Mode Setting 2) I/O Voltage Setting (VIO) This jumper allows you to select the voltage supplied to the DRAM, chipset, PCI, and the CPU's I/O buffer. The default voltage should be used unless processor overclocking requires a higher voltage. Setting Normal 3.66V VIO [1-2] (default) [2-3] CUW-RM ® VIO 123 Normal (Default) 123 3.66 Volt CUW-RM I/O Voltage Setting WARNING! Using a higher voltage may help when overclocking but may result in the shortening of your computer component's life. It is strongly recommended that you leave this setting on its default. 18 ASUS CUW-RM User's Manual