Asus ESC500 G2 User Manual - Page 53
pin fans or pins 2-3 when using 4-pin fans.
View all Asus ESC500 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. Chassis Fan control setting (3-pin CHAFAN_SEL) These jumpers allow you to switch for fan pin selection. The CHAFAN_SEL jumper is for the front fans and rear fans control. Set to pins 1-2 when using 3-pin fans or pins 2-3 when using 4-pin fans. • If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not work and the fan you installed will always run at full speed. ASUS ESC500 G2 3-11
3-11
ASUS ESC500 G2
•
If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed
may not work.
•
If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will
not work and the fan you installed will always run at full speed.
2.
Chassis Fan control setting (3-pin CHAFAN_SEL)
These jumpers allow you to switch for fan pin selection. The CHAFAN_SEL
jumper is for the front fans and rear fans control. Set to pins 1–2 when using
3-pin fans or pins 2–3 when using 4-pin fans.