Asus M3N-HT DELUXE User Manual - Page 102

MEMCLK Drive Strength [Auto] Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x] Data Drive Strength [Auto] Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x] DQS Drive Strength [Auto] Configuration options: [Auto] [0.75x] [1.00x] [1.25x] [1.50x] DRAM Drivers Weak Mode [Auto] Configuration options: [Auto] [Normal] [Weak] AMD Virtualization [Enabled] Enabling this functions allows hardware facilitated capacities for running several 386 virtual machines on the system simultaneously. Configuration options: [Disabled] [Enabled] SLI-Ready Memory [Disabled] Allows you to select the SPD profile for SLI-Ready memory modules. The configuration options may vary depending on the type of module you installed. Configuration options: [Disabled] [Optimal] [High Frequency] SLI-Ready Memory CPUOC [n] Allows you to set the CPU overclocking percentage to optimize memory settings. Setting to [CPUOC MAX] will make memory settings to reach the optimum. During CPU overclocking, you may need to manually adjust the CPU voltage for better system stability. This item is not user-configurable when the SLI-Ready Memory item is disabled. Configuration options: [CPUOC 0%] [CPUOC 1%] [CPUOC 2%]... [CPUOC 14%][CPUOC MAX] AMD Live! [Disabled] Enables or disables the AMD Live! technology. Configuration options: [Disabled] [Enabled] AMD Cool "n" Quiet Function [Disabled] Enables the AMD Cool "n" Quiet technology which supports P-state transitions in AMD processors. Configuration options: [Disabled] [Enabled] Cache Mapping Cycle [Auto] Configuration options: [Auto] [Disabled] [Enabled] 4-24 Chapter 4: BIOS setup