Asus M3N-HT DELUXE User Manual - Page 99

Memory Clock Frequency [Auto] Configuration options: [Auto] [DDR2 553] [DDR2 667] [DDR2 800] [DDR2 1066] Tcl [Auto] Configuration options: [Auto] [3] [4] [5] [6] Trcd [Auto] Configuration options: [Auto] [3] [4] [5] [6] Trp [Auto] Configuration options: [Auto] [3] [4] [5] [6] Tras [Auto] Configuration options: [Auto] [5] [6] [7] [8]...[18] 1T/2T Memory Timing [Auto] Configuration options: [Auto] [1T] [2T] Memory DCT Mode [Auto] Allows you to set the DRAM controller mode. The DRAM channel runs at 128-bit in [Ganged Mode] while running at 64-bit in [Unganged Mode]. Configuration options: [Auto] [Ganged Mode] [Unganged Mode] This item appears only when you are using an AM2+ CPU. Memory Hole Remapping [Enabled] Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory. Configuration options: [Enabled] [Disabled] AI Clock Skew [Auto] Configuration options: [Auto] [Manual] The following items become user-configurable when you set AI Clock Skew to [Manual]. Channel A Clock Skew [Normal] Allows you to adjust the DRAM clock skew for Channel A. Configuration options: [Advance 900ps] [Advance 750ps] [Advance 600ps] [Advance 450ps] [Advance 300ps] [Advance 150ps] [Normal] [Delay 150ps] [Delay 300ps] [Delay 450ps] [Delay 600ps] [Delay 750ps] [Delay 900ps] Channel B Clock Skew [Normal] Allows you to adjust the DRAM clock skew for Channel B. Configuration options: [Advance 900ps] [Advance 750ps] [Advance 600ps] [Advance 450ps] [Advance 300ps] [Advance 150ps] [Normal] [Delay 150ps] [Delay 300ps] [Delay 450ps] [Delay 600ps] [Delay 750ps] [Delay 900ps] Advanced Memory Settings CPU On-die Termination [Auto] Configuration options: [Auto] [300 ohm] [150 ohm] [75 ohm] ASUS M3N-HT Deluxe Series 4-21