Asus P I-P55T2P4S User Manual - Page 14
Jumper Settings
View all Asus P I-P55T2P4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
III. INSTALLATION (Jumpers) III. INSTALLATION Jumper Settings 1. On-Board Multi-I/O Selection (JP1) (For SMC SMC37C669 Only) For SMC Multi-I/O SMC37C669, you can selectively disable each onboard Multi-I/O item (floppy, serial, parallel, and IrDA) through BIOS (see page 35) or disable all Multi-I/O items at once with the following jumper in order to use your own Multi-I/O card. If your motherboard does not use the above SMC Multi-I/O, the following jumper will not be available and you can only disabled each item through BIOS. Selections Enable Disable JP1 [1-2] (Default) [2-3] JP 1 1 2 3 Enable (Default) JP 1 1 2 3 Disabled Multi I/O Setting (Enable / Disable) (For SMC 37C669 Only) 2. Flash ROM Boot Block Programming (JP8) This sets the operation mode of the boot block area of the BIOS Flash ROM to allow programming in the Enabled position. Programming JP8 Disabled [1-2] (Default) Enabled [2-3] JP8 123 Disabled (Default) JP8 123 Enabled Boot Block Programming (Disable / Enable) 8 P/I-P55T2P4 User's Manual