Asus P4G8X P4G8X User Manual - Page 49
ASUS P4G8X series motherboard user guide, ASUS EZ Plug™ and ATX power connectors, pin ATXPWR, 4-pin
View all Asus P4G8X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
8. ASUS EZ Plug™ and ATX power connectors (20-pin ATXPWR, 4-pin EZ_PLUG, 4-pin ATX12V) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 20-pin ATXPWR connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU. If you are using a standard ATX power supply that does not have the ATX +12V plug, connect one 4-pin device power plug to the ASUS EZ Plug™ connector labeled EZ_PLUG. Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate. P4G8X ® ATXPWR +3.3VDC -12.0VDC COM PS_ON# COM COM COM -5.0VDC +5.0VDC +5.0VDC +3.3VDC +3.3VDC COM +5.0VDC COM +5.0VDC COM PWR_OK +5VSB +12.0VDC EZ_PLUG +5V GND GND +12V ATX12V +12V DC GND P4G8X ATX Power Connector +12V DC GND ASUS P4G8X series motherboard user guide 2-23