Asus P4PE P4PE User Manual - Page 42
Jumpers
View all Asus P4PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2.7 Jumpers 1. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (see section 4.5.1 Power Up Control). KBPWR1 12 23 +5V +5VSB ® P4PE (Default) P4PE Keyboard Power Setting 2. Wireless PCI and USB settings (3-pin WPCI_USB) These jumpers are reserved. DO NOT change the default settings. ® P4PE P4PE WPCI_USB Setting WPCI_USB 31 53 42 Wireless PCI_USB 64 Original PCI reserved pin (Default) 2-16 Chapter 2: Hardware information
2-16
Chapter 2: Hardware information
2.7
Jumpers
P4PE
P4PE Keyboard Power Setting
KBPWR1
+5V
(Default)
+5VSB
23
12
1.
Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the
computer when you press a key on the keyboard (the default is the
Space Bar). This feature requires an ATX power supply that can supply
at least 1A on the +5VSB lead, and a corresponding setting in the
BIOS (see section 4.5.1 Power Up Control).
2.
Wireless PCI and USB settings (3-pin WPCI_USB)
These jumpers
are reserved. DO NOT change the default settings.
P4PE
P4PE WPCI_USB Setting
WPCI_USB
Wireless
PCI_USB
(Default)
3
5
4
6
1
3
2
4
Original
PCI
reserved pin