Asus P4PE P4PE User Manual - Page 49
ASUS P4PE motherboard user guide, ASUS EZ Plug™ and ATX power connectors, pin ATXPWR1, 4-pin
View all Asus P4PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
8. ASUS EZ Plug™ and ATX power connectors (20-pin ATXPWR1, 4-pin EZ_PLUG1, 4-pin ATX12V1) These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. In addition to the 20-pin ATXPWR1 connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU. If you are using a standard ATX power supply that does not have the ATX +12V plug, connect one 4-pin device power plug to the ASUS EZ Plug™ connector labeled EZ_PLUG1. Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate. ® P4PE ATXPWR1 EZ_PLUG1 Pin 1 +12.0VDC +5VSB PWR_OK GND +5.0VDC GND +5.0VDC GND +3.3VDC +3.3VDC +5.0VDC +12V GND +5.0VDC GND -5.0VDC +5V GND GND GND PS_ON# GND ATX12V1 -12.0VDC +3.3VDC +12V DC +12V DC GND GND P4PE ATX & Auxiliary Power Connectors ASUS P4PE motherboard user guide 2-23