Asus P4PE P4PE User Manual - Page 48
Hardware information, Chassis intrusion connector 4-1 pin CHASSIS1, SMBus connector 6-1
View all Asus P4PE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
6. Chassis intrusion connector (4-1 pin CHASSIS1) This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event. By default, the pins labeled "Chassis Signal" and "Ground" are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins. CHASSIS1 +5VSB_MB Chassis Signal GND ® P4PE P4PE Chassis Alarm Lead (Default) 7. SMBus connector (6-1 pin SMB1) This connector allows you to connect SMBus (System Management Bus) devices. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface. ® P4PE P4PE SMBus Connector SMB1 1 FLOATING SMBCLK Ground SMBDATA +3V 2-22 Chapter 2: Hardware information