Asus P4T-F User Manual - Page 23
System Memory - socket
View all Asus P4T-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3. H/W SETUP System Memory 3. HARDWARE SETUP 3.5 System Memory NOTE: No hardware or BIOS setup is required after adding or removing memory. This motherboard has four 184-pin Rambus Inline Memory Modules (RIMM) sockets. These sockets support 64Mbit, 128Mbit, and 256Mbit Direct RDRAM technologies. Location Memory Module Subtotal RIMMA1 (Rows 0&1) RDRAM x 1 C-RIMM (use when socket will not be populated) RIMMA2 (Rows 2&3) RDRAM x 1 C-RIMM (use when socket will not be populated) RIMMB1 (Rows 4&5) RDRAM x 1 C-RIMM (use when socket will not be populated) RIMMB2 (Rows 6&7) RDRAM x 1 C-RIMM (use when socket will not be populated) TOTAL SYSTEM MEMORY = (2GB Max) IMPORTANT 1. The memory configuration of channel A (RIMMA1 and RIMMA2) and channel B (RIMMB1 and RIMMB2) must be identical (see below). 2. C-RIMMs (Continuity RIMM) must be used to complete the sockets that are not populated by RDRAMs. A C-RIMM is necessary to avoid breaking the signal lines, which are a serial connection in a Rambus interface, such as used in this motherboard. This assures the electrical integrity of a Rambus interface. 3. When C-RIMMs are required, it is recommended that they be inserted into RIMMA2 and RIMMB2. a. C-RIMM 128MB RDRAM C-RIMM 128MB RDRAM RIMMB2 RIMMB1 RIMMA2 RIMMA1 NOTE: When using only two memory modules, it is recommended that you use configuration a. b. 128MB RDRAM RIMMB2 C-RIMM RIMMB1 128MB RDRAM C-RIMM RIMMA2 RIMMA1 c. 128MB RDRAM RIMMB2 128MB RDRAM RIMMB1 128MB RDRAM 128MB RDRAM RIMMA2 RIMMA1 ASUS P4T-F User's Manual 23