Asus P4T-M P4T-M User Manual - Page 33

ASUS P4T-M User's Manual, Wake-On-LAN Connector 3-pin WOL, Wake On LAN or PCI Modem, Digital Audio - p4t e bios

Get Asus P4T-M PDF manuals and user guides View all Asus P4T-M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

3. H/W SETUP Connectors 3. HARDWARE SETUP 16) Digital Audio Interface Connector (3-pin SPDIFOUT) This connector is used to send audio signal outputs to amplifiers and speakers and to digital recording devices like mini CD player/recorders. P4T-M P4T-M Digital Audio Interface 1 +5V SPDIFOUT Ground SPDIFOUT 17) Wake-On-LAN Connector (3-pin WOL) This connector supports a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see BIOS 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power. IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOL_CON +5 Volt Standby PME P4T-M Ground P4T-M Wake-On-LAN Connector ASUS P4T-M User's Manual 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
ASUS P4T-M User’s Manual
33
3. HARDWARE SETUP
Connectors
3. H/W SETUP
17) Wake-On-LAN Connector (3-pin WOL)
This connector supports a LAN card with a Wake-On-LAN output, such as the
ASUS PCI-L101 Ethernet card (see
7. Appendix
). The connector powers up the
system when a wakeup packet or signal is received through the LAN card.
IMPORTANT:
This feature requires that
Wake On LAN or PCI Modem
is
enabled (see
BIOS 4.5.1 Power Up Control
) and that
y
our system has an ATX
power supply with at least 720mA +5V standby power.
P4T-M
P4T-M Wake-On-LAN Connector
IMPORTANT:
Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
PME
Ground
WOL_CON
16) Digital Audio Interface Connector (3-pin SPDIFOUT)
This connector is used to send audio signal outputs to amplifiers and speakers
and to digital recording devices like mini CD player/recorders.
P4T-M
P4T-M Digital Audio Interface
SPDIFOUT
SPDIFOUT
+5V
Ground
1