Asus P5GD2 Deluxe P5GD2 Deluxe user's manual - Page 90
SATA Clock Sync to PCIEX [Disabled]
View all Asus P5GD2 Deluxe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
FSB Termination Voltage [Auto] Sets the Front Side Bus (FSB) termination voltage. Configuration options: [1.20V] [1.40V] [Auto] The following item appears only when the AI Overclocking item is set to [Manual]. CPU to NB Trapping [Auto] Sets the CPU to the NorthBridge trapping frequency. Configuration options: [Auto] [000(100/266MHz)] [001(133MHz)] [010(200MHz)] [011(166MHz)] CPU Frequency [XXX] (value is auto-detected) Indicates the frequency sent by the clock generator to the system bus and PCI bus. The bus frequency (external frequency) multiplied by the bus multiple equals the CPU speed. The value of this item is auto-detected by BIOS. The values range from 100 to 400. Refer to the following table for the correct Front Side Bus and CPU External Frequency settings. Use the and keys to adjust the value. Table 4.4.2 FSB/CPU External Frequency Synchronization Front Side Bus FSB 800 FSB 533 FSB 400 CPU External Frequency 200 MHz 133 MHz 100 MHz Selecting a very high CPU frequency may cause the system to become unstable! If this happens, revert to the default setting. PCI Express Frequency [100] Sets the PCI Express frequency. Configuration options: [90] [91] ~ [120] SATA Clock Sync to PCIEX [Disabled] Enables or disables the SATA clock synchronization to the PCI Express. Configuration options: [Disabled] [Enabled] PCI Clock Synchronization Mode [Asynchronization] Selects the PCI Clock Synchronization mode. Configuration options: [To CPU] [To PCI Express] [Asynchronization] 4-20 Chapter 4: BIOS setup