Asus P7P55D User Manual - Page 96

ASUS EZ Flash 2, AI NET 2 - unknown device

Page 96 highlights

ASUSTek O.C. Profile Utility V4.00a Current CMOS BOARD: P7P55D VER: 0157 DATE: 06/19/2009 Restore CMOS BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ A: Note [Enter] Select or Load [Up/Down/Home/End] Move [Tab] Switch [B] Backup [V] Drive Info [Esc] Exit • This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/CPU configuration and BIOS version. • Only the CMO file can be loaded. 3.9.2 AI NET 2 AI NET 2 Pair Status Length BIOS SETUP UTILITY Check Realtek LAN cable [Disabled] Tools Check Realtek LAN cable during POST. It will take 3 to 10 seconds to diagnose LAN cable. Check Realtek LAN Cable [Disabled] [Disabled] BIOS will not check the Realtek LAN cable during the Power-On Self-Test (POST). [Enabled] BIOS checks the Realtek LAN cable during the Power-On Self-Test (POST). 3.9.3 ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2. When you press , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press to confirm your choice. Check section 3.2.2 ASUS EZ Flash 2 utility for details. Chapter 3 3-34 Chapter 3: BIOS setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122

3-34
Chapter 3: BIOS setup
Chapter 3
3.9.3
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice. Check section
3.2.2 ASUS EZ Flash 2 utility
for details.
Current CMOS
Restore CMOS
A:
Note
[Enter] Select or Load
[Tab] Switch
[V] Drive Info
[Up/Down/Home/End] Move
[B] Backup
[Esc] Exit
PATH:
A:\
BOARD:
P7P55D
VER:
0157
DATE:
06/19/2009
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
ASUSTek O.C. Profile Utility V4.00a
3.9.2
AI NET 2
Check Realtek LAN Cable [Disabled]
[Disabled]
BIOS will not check the Realtek LAN cable during the Power-On Self-Test
(POST).
[Enabled]
BIOS checks the Realtek LAN cable during the Power-On Self-Test
(POST).
AI NET 2
Pair
Status
Length
Check Realtek LAN cable
[Disabled]
BIOS SETUP UTILITY
Tools
Check Realtek LAN
cable during POST.
It will take 3 to 10
seconds to diagnose
LAN cable.
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
Only the CMO file can be loaded.