Asus P9X79 WS User Manual

Asus P9X79 WS Manual

Get Asus P9X79 WS PDF manuals and user guides View all Asus P9X79 WS manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P9X79 WS manual content summary:

  • Asus P9X79 WS | User Manual - Page 1
    P9X79 WS Motherboard
  • Asus P9X79 WS | User Manual - Page 2
    TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this
  • Asus P9X79 WS | User Manual - Page 3
    computer system 2-35 2.3.1 Additional tools and components to build a PC system 2-35 2.3.2 CPU installation 2-36 2.3.3 CPU heatsink and fan assembly installation 2-38 2.3.4 DIMM installation 2-39 2.3.5 Motherboard installation 2-40 2.3.6 ATX Power connection 2-42 2.3.7 SATA device connection
  • Asus P9X79 WS | User Manual - Page 4
    3-24 3.5 Advanced menu 3-29 3.5.1 CPU Configuration 3-30 3.5.2 CPU Power Management Configuration 3-31 3.5.3 System Agent Configuration 3-32 3.5.4 PCH Configuration 3-33 3.5.5 SATA Configuration 3-33 3.5.6 USB Configuration 3-36 3.5.7 Onboard Devices Configuraton 3-37 3.5.8 APM 3-39
  • Asus P9X79 WS | User Manual - Page 5
    3.0 Boost 4-14 4.3.9 ASUS SSD Caching 4-15 4.3.10 ASUS Update 4-16 4.3.11 MyLogo2 4-17 4.3.12 Audio configurations 4-19 4.4 RAID configurations 4-20 4.4.1 RAID definitions 4-20 4.4.2 Installing Serial ATA hard disks 4-21 4.4.3 Setting the RAID item in BIOS 4-21 4.4.4 Intel® Rapid Storage
  • Asus P9X79 WS | User Manual - Page 6
    Chapter 5: Multiple GPU technology support 5.1 ATI® CrossFireX™ technology 5-1 5.1.1 Requirements 5-1 5.1.2 Before you begin 5-1 5.1.3 Installing CrossFireX graphics cards 5-2 5.1.4 Installing the device drivers 5-3 5.1.5 Enabling the ATI® CrossFireX™ technology 5-3 5.2 NVIDIA® SLI™ technology
  • Asus P9X79 WS | User Manual - Page 7
    limits for a Class B digital device, pursuant to Part 15 of the installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions of the monitor to the graphics card is required to assure compliance with
  • Asus P9X79 WS | User Manual - Page 8
    in our products at ASUS website at http://csr.asus.com/english/ REACH.htm. ASUS Recycling/Takeback Services ASUS recycling and takeback go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. DO NOT throw the motherboard in municipal waste. This
  • Asus P9X79 WS | User Manual - Page 9
    the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came
  • Asus P9X79 WS | User Manual - Page 10
    support This chapter describes how to install and configure multiple ATI® CrossFireX™ and NVIDIA® SLI™ graphics cards. Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated
  • Asus P9X79 WS | User Manual - Page 11
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete
  • Asus P9X79 WS | User Manual - Page 12
    ) * This motherboard is ready to support PCIe 3.0 SPEC. Functions will be available when using PCIe 3.0compliant devices. Please refer to www.asus.com for updated details. Supports NVIDIA® 4-Way SLI™ Technology Supports AMD® Quad-GPU CrossFireX™ Technology Intel® X79 Express Chipset: - 2 x SATA 6Gb
  • Asus P9X79 WS | User Manual - Page 13
    graphics user interface - ASUS SSD Caching - USB 3.0 Boost - Front Panel USB 3.0 Support - MemOK! - AI Suite II - AI Charger+ ASUS Quiet Thermal Solution - ASUS Fanless Design: Heat-pipe solution - ASUS Fan Xpert+ ASUS EZ DIY - USB BIOS Flashback - ASUS O.C. Profile - ASUS Q-Connector - ASUS
  • Asus P9X79 WS | User Manual - Page 14
    P9X79 WS specifications summary Workstation Unique Features BIOS Features Back Panel I/O Ports Internal I/O Connectors Manageability 6 x PCIe x 16 slots Quick Gate: 1 vertical USB 2.0 on board ASUS SASsaby series Cards support ASUS WS Diag. LED ASUS WS 3-color LED 64 Mb Flash ROM, UEFI BIOS, PnP,
  • Asus P9X79 WS | User Manual - Page 15
    ATA 6Gb/s cables 4 x Serial ATA 3Gb/s cables 1 x ASUS 4-Way SLI bridge connector 1 x ASUS 3-Way SLI bridge connector 1 x ASUS SLI bridge connector 2 in 1 Q-connector I/O shield User's Manual Support DVD Form Factor Drivers ASUS Utilities ASUS Update Anti-virus software (OEM version) CEB Form
  • Asus P9X79 WS | User Manual - Page 16
    xvi
  • Asus P9X79 WS | User Manual - Page 17
    This chapter describes the motherboard features and the new technologies it supports. Chapter 1: 1Product introduction
  • Asus P9X79 WS | User Manual - Page 18
    Chapter summary 1 1.1 Welcome 1-1 1.2 Package contents 1-1 1.3 Special features 1-2 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 19
    x ASUS Q-Shield (I/O shield) 1 x ASUS 2-in-1 Q-Connector Kit (Retail version only) 1 x 2-Way SLI bridge connector 1 x 3-Way SLI bridge connector 1 x 4-Way SLI bridge connector ASUS motherboard support DVD User guide If any of the above items is damaged or missing, contact your retailer. ASUS P9X79
  • Asus P9X79 WS | User Manual - Page 20
    aiming to improve and optimize graphics performance, as well as have the latest, most future-proof technology. * This motherboard is ready to support PCIe 3.0 SPEC. Functions will be available when using PCIe 3.0-compliant devices. Please refer to www.asus. com for updated details. Quad-Channel DDR3
  • Asus P9X79 WS | User Manual - Page 21
    without entering the BIOS. Built-in Dual Intel Server-Class Gigabit LAN To enhance network reliability, the P9X79 WS is built in dual Intel® Gigabit LAN that features lower CPU utilization, less package drop rate, wide driver supported. Base on performance testing, CPU utilization of Intel lan can
  • Asus P9X79 WS | User Manual - Page 22
    . LED checks key components (CPU, memory, graphics card and hard drive) in sequence during bootup. If an error is found, the LED next to the relevant device will stay lit until the problem is solved. This user-friendly design provides an intuitive way to locate root problems in seconds. Quick Gate
  • Asus P9X79 WS | User Manual - Page 23
    power consumption. This also reduces fan noise and extends component longevity. ASUS SSD Caching SSD caching from ASUS is easier than ever. At 3X faster, this feature boosts system performance by using an installed SSD with no capacity limitations as a cache for frequently accessed data. Harness
  • Asus P9X79 WS | User Manual - Page 24
    . ASUS Fan Xpert+ Hardware-level ASUS Fan Xpert+ allows users to independently adjust both CPU and case fan speeds with multiple dedicated controllers based on different ambient temperatures,climate conditions and system loads. Built-in profiles offer flexible automatic and manual fan speed
  • Asus P9X79 WS | User Manual - Page 25
    module eliminates the trouble of connecting the system panel cables one at a time and avoiding wrong cable connections. ASUS EZ-Flash 2 ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a bootable floppy disk or an OS-based utility. ASUS P9X79 WS 1-7
  • Asus P9X79 WS | User Manual - Page 26
    S/PDIF or HDMI) designed to deliver audio to an external decoder. ErP Ready The motherboard is European Union's Energy-related Products (ErP) ready, and ErP requires products to meet certain energy efficiency requirement in regards to energy consumptions. This is in line with ASUS vision of creating
  • Asus P9X79 WS | User Manual - Page 27
    This chapter lists the hardware setup procedures that you have to perform when installing system components. It Chapter 2: includes description of the jumpers and connectors on the motherboard. 2 Hardware information
  • Asus P9X79 WS | User Manual - Page 28
    Chapter summary 2 2.1 Before you proceed 2-1 2.2 Motherboard overview 2-2 2.3 Building your computer system 2-30 2.4 Starting up for the first time 2-46 2.5 Turning off the computer 2-47 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 29
    or in the bag that came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ASUS P9X79 WS 2-1
  • Asus P9X79 WS | User Manual - Page 30
    2.2 Motherboard overview 2.2.1 Motherboard layout Refer to 2.2.9 Internal Connectors for more information about rear panel connectors and internal connectors. 2-2 Chapter 2: Hardware information
  • Asus P9X79 WS | User Manual - Page 31
    D�D�R�3�D�IM�M��sl�ot�s 3. LGA2011 CPU Socket 4. CPU, CPU OPT, Chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_OPT, 4-pin CHA_FAN1/2/3/4) 5. EZ Plug (4-pin EZ_Plug) 6. MemOK! switch 7 E�P�U�S�w�itc�h 8. USB 3.0 connector (20-1 pin USB3_34) 9. Intel® X79 Serial ATA 6.0 Gb/s connectors
  • Asus P9X79 WS | User Manual - Page 32
    2.2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA2011 socket designed for the 2nd Generation Intel® Core™ i7 Processor Extreme Edition. Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap
  • Asus P9X79 WS | User Manual - Page 33
    2.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. ® ® Recommended memory configurations ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 34
    to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. • The max. 64GB memory capacity can be supported with DIMMs of 8GB (or above). ASUS will update QVL once the DIMMs are available on the market. • Always install DIMMs with the same CAS latency. For optimum compatibility
  • Asus P9X79 WS | User Manual - Page 35
    slots Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 2.0 x16_1 slot ( 5 PCIe 2.0 x16_5 slot (x4 mode) 6 PCIe 2.0 x16_6 slot (x8 mode) ASUS P9X79 WS 2-7
  • Asus P9X79 WS | User Manual - Page 36
    8 3 System CMOS/Real Time IDE Channel IRQ assignments for this motherboard A B C D E F SATA Controller 1 - - shared - - - - - SATA Controller 2 - - - - shared - - - USB 2.0 Controller 1 - - - - - - - shared USB 2.0 Controller 2 - - - - - - - shared HD Audio
  • Asus P9X79 WS | User Manual - Page 37
    source indicating that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard power-on switch. ® 2. Reset switch Press the reset switch to reboot the system. ® ASUS P9X79 WS 2-9
  • Asus P9X79 WS | User Manual - Page 38
    this switch to Enable will automatically detect the current PC loadings and intelligently moderate the power consumption. For ensuring system performance, turn the switch setting to Enable when the system is powered off. ® 4. TPU switch Turning this switch to Enable will automatically optimize the
  • Asus P9X79 WS | User Manual - Page 39
    the system automatically reboots when each timing set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the DIAG_DRAM lights continuously. Replace the DIMMs with ones recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on the ASUS website
  • Asus P9X79 WS | User Manual - Page 40
    VGA card, and HDD indicate key component status during POST (Power-on Self Test), providing an elegant embellishment to the motherboard design. The LED lights will flash sequentially during system bootup. If an error is found, the LED next to the error device will continue lighting until the problem
  • Asus P9X79 WS | User Manual - Page 41
    3. EPU LED The EPU LED lights when the EPU switch is turned to Enable. ® 4. TPU LED The TPU LED lights when the TPU switch is turned to Enable. ® ASUS P9X79 WS 2-13
  • Asus P9X79 WS | User Manual - Page 42
    Ai Tweaker Enabled/ Overclocking Green EPU Enabled/ Power saving mode P9X79 WS ® Lights up according to Ai Tweaker settings P9X79 WS Ai Tweaker LED 6. Q-Code LEDs The Q-Code LED design provides you the 2-digit display, allowing you to know the system status. Refer to the Q-Code table below for
  • Asus P9X79 WS | User Manual - Page 43
    not loaded PEI Core is started Pre-memory CPU initialization is started Pre-memory System Agent initialization is started Pre-memory PCH initialization is started Pre-memory initialization codes Memory initialization Reserved for ASL (see ASL Status Codes section below) ASUS P9X79 WS 2-15
  • Asus P9X79 WS | User Manual - Page 44
    Memory initialization error. Invalid memory type or incompatible memory speed Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU
  • Asus P9X79 WS | User Manual - Page 45
    for future AMI DXE codes DXE initialization codes Boot Device Selection (BDS) phase is started Driver connecting is started PCI Bus initialization is started PCI Bus Hot Plug Controller Initialization PCI Bus Enumeration PCI Bus Request Resources PCI Bus Assign Resources ASUS P9X79 WS 2-17
  • Asus P9X79 WS | User Manual - Page 46
    A3 A4 A5 A6 A7 A8 A9 AA AB Description Console Output devices connect Console input devices connect Super IO Initialization USB initialization is started USB Reset USB Detect USB Enable Reserved for future AMI codes IDE initialization is started IDE Reset IDE Detect IDE Enable SCSI initialization
  • Asus P9X79 WS | User Manual - Page 47
    No Space for Legacy Option ROM No Console Output Devices are found No Console Input Devices are found Invalid password Error loading Boot Option (LoadImage returned error) Boot Option is failed (StartImage returned error) Flash update is failed Reset protocol is not available ASUS P9X79 WS 2-19
  • Asus P9X79 WS | User Manual - Page 48
    ACPI/ASL Checkpoints Code Description 0x01 System is entering S1 sleep state 0x02 System is entering S2 sleep state 0x03 System is entering S3 sleep state 0x04 System is entering S4 sleep state 0x05 System is entering S5 sleep state 0x10 System is waking up from the S1 sleep state 0x20
  • Asus P9X79 WS | User Manual - Page 49
    reboot the system so the BIOS can automatically reset parameter settings to default values. • Due to the chipset behavior, AC power off is required to enable C.P.R. function. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. ASUS P9X79 WS 2-21
  • Asus P9X79 WS | User Manual - Page 50
    pins 1-2 when using 3-pin fans or pins 2-3 when using 4-pin fans. ® • If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not work and the fan you installed will always run at full
  • Asus P9X79 WS | User Manual - Page 51
    , refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before
  • Asus P9X79 WS | User Manual - Page 52
    , refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before
  • Asus P9X79 WS | User Manual - Page 53
    the motherboard support DVD and load the driver during OS installation. For 32/64bit Windows XP OS, load first the Marvell shared library driver, and then load Marvell 91xx SATA Controller Driver. For Windows Vista / Windows 7 OS, load only the Marvell 91xx SATA Controller Driver. ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 54
    USB 3.0 specificaton that supports up to 5.0 Gbps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.0 connector, you can have a front panel USB 3.0 solution. ® You can connect the ASUS front panel USB
  • Asus P9X79 WS | User Manual - Page 55
    a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. ASUS P9X79 WS 2-27
  • Asus P9X79 WS | User Manual - Page 56
    cable to this connector, then install the module to a slot opening at the back of the system chassis. ® Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard! The IEEE 1394a module is purchased separately. 7. Digital audio connector (4-1 pin SPDIF_OUT) This
  • Asus P9X79 WS | User Manual - Page 57
    connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan power. • If you install two VGA cards, we recommend that you plug
  • Asus P9X79 WS | User Manual - Page 58
    that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. ® • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability
  • Asus P9X79 WS | User Manual - Page 59
    Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. This connector can also serve for G.P. Diagnosis card installation. ® ASUS P9X79 WS 2-31
  • Asus P9X79 WS | User Manual - Page 60
    configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus.com
  • Asus P9X79 WS | User Manual - Page 61
    14. EZ Plug connector (4-pin EZ_PLUG) This 4-pin connector is for HDD power supply plug. When using 3 or more graphic cards, more power may be needed, Use this connector to enhance power by 12V. ASUS P9X79 WS 2-33
  • Asus P9X79 WS | User Manual - Page 62
    and warnings. • ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the
  • Asus P9X79 WS | User Manual - Page 63
    2.3.1 Additional tools and components to build a PC system 1 bag of screws PC chassis Philips (cross) screwdriver Power supply unit Intel LGA 2011 CPU Intel LGA 2011 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card The tools and components in the
  • Asus P9X79 WS | User Manual - Page 64
    2.3.2 CPU installation Please note the order in opening/ closing the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down. 1A
  • Asus P9X79 WS | User Manual - Page 65
    5 6 Triangle mark 7 8 B A 9 B A ASUS P9X79 WS 2-37
  • Asus P9X79 WS | User Manual - Page 66
    2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 B 2 A A B 2-38 Chapter 2: Hardware information
  • Asus P9X79 WS | User Manual - Page 67
    2.3.4 1 DIMM installation 2 3 To remove a DIMM B A ASUS P9X79 WS 2-39
  • Asus P9X79 WS | User Manual - Page 68
    2.3.5 1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2 2-40 Chapter 2: Hardware information
  • Asus P9X79 WS | User Manual - Page 69
    3 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS P9X79 WS 2-41
  • Asus P9X79 WS | User Manual - Page 70
    2.3.6 1 ATX Power connection 2 OR 2-42 Chapter 2: Hardware information
  • Asus P9X79 WS | User Manual - Page 71
    2.3.7 1 SATA device connection OR 2 ASUS P9X79 WS 2-43
  • Asus P9X79 WS | User Manual - Page 72
    2.3.8 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB Connector To install front panel audio connector AAFP USB The actual location may vary with motherboards. 2-44 Chapter 2: Hardware information
  • Asus P9X79 WS | User Manual - Page 73
    6. USB 2.0 ports 1, 2, 3, and 4 7. USB BIOS Flashback button 8. Optical S/PDIF Out port 9. USB 2.0 ports 5 and 6 10. USB 2.0 ports 7 and 8 11. USB 3.0 ports 1 and 2 12. Audio I/O ports** *and **: Refer to the tables on the next page for LAN port and audio port definitions. ASUS P9X79 WS 2-45
  • Asus P9X79 WS | User Manual - Page 74
    devices can only be used under Windows® OS environment and after the USB 3.0 driver installation. • USB 3.0 devices can only be used as data storage only. • We strongly recommend that you connect USB 3.0 devices 2.3.10 Audio I/O connections Audio I/O ports Connect to Headphone and Mic 2-46
  • Asus P9X79 WS | User Manual - Page 75
    Connect to Stereo Speakers Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers ASUS P9X79 WS 2-47
  • Asus P9X79 WS | User Manual - Page 76
    Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers 2-48 Chapter 2: Hardware information
  • Asus P9X79 WS | User Manual - Page 77
    the light starts to flash. 5. The flashing rate of the light signal accelerates along with the updating speed. Updating BIOS may have risks. If the BIOS program is damaged during the process causing the system unable to reboot, please contact the local service station for help. ASUS P9X79 WS 2-49
  • Asus P9X79 WS | User Manual - Page 78
    monitor LED may light up or change from orange to green after the system LED turns on. The system then runs the power-on self tests or POST. While the tests are running, the BIOS beeps (refer to the BIOS beep codes table below) or additional messages appear on the screen. If you do not
  • Asus P9X79 WS | User Manual - Page 79
    for less than four seconds puts the system on sleep mode or soft-off mode, depending on the BIOS setting. Pressing the power switch for more than four seconds lets the system enter the soft-off mode regardless of the BIOS setting. Refer to section 3.7 Boot Menu for details. ASUS P9X79 WS 2-51
  • Asus P9X79 WS | User Manual - Page 80
    2-52 Chapter 2: Hardware information
  • Asus P9X79 WS | User Manual - Page 81
    If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. �S�e�e��s�e��c�ti�o�n� 2.2.8 Jumpers for information on how to erase the RTC RAM. • The BIOS setup program does not support the bluetooth devices. The BIOS setup program
  • Asus P9X79 WS | User Manual - Page 82
    /motherboard temperature, CPU/5V/3.3V/12V voltage output, CPU/CPU_OPT/Chassis fan speed Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode P9X79 WS Chapter 3 Quick switch to frequently used menus. Selects the boot device
  • Asus P9X79 WS | User Manual - Page 83
    For changing the advanced system settings For displaying the system temperature, power status, and changing the fan settings. For changing the system boot configuration For configuring options for special functions For selecting the exit options and loading default settings ASUS P9X79 WS 3-3
  • Asus P9X79 WS | User Manual - Page 84
    the submenu, select the item and press . Pop-up window Select a menu item and press to display a pop-up window with the configuration options for that item. Scroll bar A scroll bar field, select it and press to display a list of options. Chapter 3 3-4 Chapter 3: BIOS setup
  • Asus P9X79 WS | User Manual - Page 85
    BIOS Information BIOS Version Build Date EC Version ME Version 0238 x64 09/16/2011 MBEC-X79-0218 7.1.20.1089 CPU Information Genuine Intel(R) CPU @ 2.00GHz Speed 2066 MHz Memory Information Total Memory 4096 MB (DDR3) Speed 1373 MHz System Language English System
  • Asus P9X79 WS | User Manual - Page 86
    password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To for accessing the system. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed. To set a
  • Asus P9X79 WS | User Manual - Page 87
    the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. Chapter 3 Scroll down to display the following items: ASUS P9X79 WS 3-7
  • Asus P9X79 WS | User Manual - Page 88
    the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set overclocking parameters. [X.M.P.] If you install memory modules supporting the eXtreme Memory Profile
  • Asus P9X79 WS | User Manual - Page 89
    [Auto] Allows you to manually adjust the Turbo CPU ratio. [Auto] All Turbo ratio are set by Intel CPU default settings [By ALL automatically overclocks the frequency and voltage of CPU and DRAM for enhancing the system performance. Configuration options: [OK] [Cancel] Chapter 3 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 90
    value. To restore the default setting, type [auto] using the keyboard and press the key. Changing the values in this menu may cause the system to become unstable! If this happens, revert to the default settings. Chapter 3 Scroll down to display the following items: 3-10 Chapter
  • Asus P9X79 WS | User Manual - Page 91
    Scroll down to display the following items: Scroll down to display the following items: Chapter 3 ASUS P9X79 WS 3-11
  • Asus P9X79 WS | User Manual - Page 92
    to adjust the value. T��h�e��v�a�l�u�e�s��r�a�n�g��e��fr�o�m���4�8��to��5��1�1��w�i�th��1� interval. DRAM WRITE Recovery Time [Auto] Use the and keys to adjust the value. T��h�e��v�a��lu�e��s�r�a�n��g�e��f�ro��m��5��t�o��3�1��w�i�t�h��1�i�n�t�e�r�v�a�l�. 3-12 Chapter 3: BIOS setup
  • Asus P9X79 WS | User Manual - Page 93
    values range from 0 to 15 with 1 interval. tCCD [Auto] Use the and keys to adjust the value. The values range from 0 to 7 with 1 interval. Chapter 3 ASUS P9X79 WS 3-13
  • Asus P9X79 WS | User Manual - Page 94
    6 Clock] [Delay 7 Clock] [Delay 8 Clock] [Delay 9 Clock] [Delay 10 Clock] [Delay 11 Clock] [Delay 12 Clock] [Delay 13 Clock] [Delay 14 Clock] Chapter 3 3-14 Chapter 3: BIOS setup
  • Asus P9X79 WS | User Manual - Page 95
    ] [Advance 6 Clock] [Advance 4 Clock] [Advance 2 Clock] [Normal] [Delay 2 Clock] [Delay 4 Clock] [Delay 6 Clock] [Delay 8 Clock] [Delay 10 Clock] [Delay 12 Clock] [Delay 14 Clock] Chapter 3 ASUS P9X79 WS 3-15
  • Asus P9X79 WS | User Manual - Page 96
    6 Clock] [Delay 7 Clock] [Delay 8 Clock] [Delay 9 Clock] [Delay 10 Clock] [Delay 11 Clock] [Delay 12 Clock] [Delay 13 Clock] [Delay 14 Clock] Chapter 3 3-16 Chapter 3: BIOS setup
  • Asus P9X79 WS | User Manual - Page 97
    ] [Advance 6 Clock] [Advance 4 Clock] [Advance 2 Clock] [Normal] [Delay 2 Clock] [Delay 4 Clock] [Delay 6 Clock] [Delay 8 Clock] [Delay 10 Clock] [Delay 12 Clock] [Delay 14 Clock] Chapter 3 ASUS P9X79 WS 3-17
  • Asus P9X79 WS | User Manual - Page 98
    [Auto] Configuration options: [Auto] [1] [2] [3] [4] [5] [6] [7] [8] Enhanced Training (CHA) [Auto] Configuration options: [Auto] [Disabled] [Enabled] Enhanced Training (CHB) [Auto] Configuration options: [Auto] [Disabled] [Enabled] Chapter 3 3-18 Chapter 3: BIOS setup
  • Asus P9X79 WS | User Manual - Page 99
    ] Use the and keys to adjust the value. The values range from 0 to 31 with 1 interval. MCH Recheck [Auto] Configuration options: [Auto] [Disabled] [Enabled] Chapter 3 ASUS P9X79 WS 3-19
  • Asus P9X79 WS | User Manual - Page 100
    F5: Optimized Defaults F6: ASUS Ratio Boost F10: Save ESC: Exit F12: Print Screen Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc. CPU Load-Line Calibration [Auto] CPU Load-line is defined by Intel spec and affects CPU voltage. The CPU working voltage will decrease proportionally
  • Asus P9X79 WS | User Manual - Page 101
    you set the CPU Voltage Frequency item to [Manual]. Use the and keys to adjust the value. The values range from 300k~500kHz with a 10k Hz interval. Do not remove the thermal module when switching to Manual mode. The thermal conditions should be monitored. Chapter 3 ASUS P9X79 WS 3-21
  • Asus P9X79 WS | User Manual - Page 102
    under light system loading to increase efficiency [Auto] Proceeds preset phase control. [Standard] Proceeds phase control based on CPU Command. [Optimized] Loads the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment
  • Asus P9X79 WS | User Manual - Page 103
    overclocking system stability. Configuration options: [Auto] [manual] DRAM-CD Power Phase control [Auto] [Auto] Proceeds preset phase tuning profile. [Optimized] Allows you to set ASUS optimized phase tuning profile. [Extreme] Allows you to set the Full phase mode. Chapter 3 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 104
    Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc. CPU Ratio [Auto] This item allows user manually adjust the maximum non-turbo CPU ratio. The value will be limited to CPU-based or factory settings. Adjusting the CPU Ratio value will change CPU Performance Settings. Use the and
  • Asus P9X79 WS | User Manual - Page 105
    Mode] Allows you to set the Offset voltage. CPU VCORE Manual Voltage [Auto] This item appears only when you set the CPU VCORE Voltage item to [Manual Mode] and allows you to set a fixed CPU VCORE voltage. The values range from 0.800V to 1.700V with a 0.005V interval. Chapter 3 ASUS P9X79 WS 3-25
  • Asus P9X79 WS | User Manual - Page 106
    you to set the DRAM voltage. The values range from 1.20V to 1.99V with a 0.005V interval. According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage the CPU permanently. We recommend you install the DIMMs with the voltage requirement below 1.65V. Chapter 3 3-26 Chapter
  • Asus P9X79 WS | User Manual - Page 107
    on CHB [Auto] Allows you to set the DRAM DATA REF Voltage on Channel B. The values range from 0.3950x to 0.6300x with a 0.005x interval. Chapter 3 ASUS P9X79 WS 3-27
  • Asus P9X79 WS | User Manual - Page 108
    range from 0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance DRAM overclocking ability. CPU Spread Spectrum [Auto] Setting to [Disabled] enhances the BCLK overclocking ability. Configuration options: [Auto] [Disabled] [Enabled] PCIE Spread Spectrum [Auto] Setting to [Disabled
  • Asus P9X79 WS | User Manual - Page 109
    can cause the system to malfunction. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced Monitor Boot Tool > CPU Configuration > System Agent Configuration > PCH Configuration > SATA Configuration > SAS Configuration > USB Configuration > Onboard Devices Configuration > APM
  • Asus P9X79 WS | User Manual - Page 110
    Microcode Patch Max CPU Speed Min CPU Speed Processor Cores Intel HT Technology Intel VT-x Technology Monitor 206d2 8000020c 2000 MHz 1200 MHz 6 Supported Supported Boot Tool Includes TM1, TM2 and EMTTM L1 Data Cache L1 Code Cache L2 Cache L3 Cache 32 kB x 6 32
  • Asus P9X79 WS | User Manual - Page 111
    CPU Ratio Auto Enhanced Intel SpeedStep Technology Enabled Turbo Mode Enabled CPU C1E Auto CPU C3 Report Auto CPU C6 Report Auto CPU C7 Report Auto Allows user to manually adjust the maximum non-turbo CPU ratio. The value will be limited to CPU-based or factory setting. CPU
  • Asus P9X79 WS | User Manual - Page 112
    Allows you to disable or enable the CPU C3 report to OS. CPU C6 Report [Auto] Allows you to disable or enable the CPU C6 report to OS. CPU C7 Report [Auto] Allows you to disable or enable the CPU C7 report to OS. 3.5.3 System Agent Configuration UEFI BIOS Utility - Advanced Mode Exit Main Back
  • Asus P9X79 WS | User Manual - Page 113
    detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port. UEFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced Advanced\ SATA Configuration > Monitor SATA Configuration SATA Mode AHCI Mode
  • Asus P9X79 WS | User Manual - Page 114
    configuration. [Disabled] [IDE Mode] [AHCI Mode] [RAID Mode] Disables the SATA function. Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. Hotplug support configurations for SATA are disallowed under this mode. Set to [AHCI Mode] when
  • Asus P9X79 WS | User Manual - Page 115
    AHCI Mode] and [RAID mode]. It allows users to enable/disable SATA Hot Plug Support. Configuration options: system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Disabled] [Enabled] ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 116
    the item shows None. Legacy USB Support [Enabled] [Disabled] The USB devices can be used only for the BIOS setup program. [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Auto] Allows the system to detect the presence of USB devices at startup. If detected, the
  • Asus P9X79 WS | User Manual - Page 117
    [AC97] Sets the front panel audio connector (AAFP) mode to high definition audio. Sets the front panel audio connector (AAFP) mode to legacy AC97 SPDIF Out Type [SPDIF] [SPDIF] Sets to [SPDIF] for SPDIF audio output. [HDMI] Sets to [HDMI] for HDMI audio output. Chapter 3 ASUS P9X79 WS 3-37
  • Asus P9X79 WS | User Manual - Page 118
    Intel LAN controller. Configuration options: [Disabled] [Enabled] Intel LAN2 Controller [Enabled] [Disabled] Disables the controller. [Enabled] Enables the Intel LAN controller. Intel the Intel LAN controller for Super IO device. Change Settings Advanced\ Onboard Devices Configuration\ Serial
  • Asus P9X79 WS | User Manual - Page 119
    BIOS Disabled] [Disabled] Disables the Ring device from generating a wake event. [Enabled] Enables the Ring device to generate a wake event. system ready for ErP requirement. When set to Enabled, all other PME options will be switched off. Configuration options: [Disabled] [Enabled] ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 120
    system temperature/power status, and allows you to change the fan settings. UEFI BIOS Utility - Advanced Mode Exit Main Ai Tweaker Advanced Monitor Boot Tool CPU Temperature 45�º�C 1�1�3��º�F MB Temperature +34ºC / +93ºF CPU Fan Speed 3325 RPM CPU OPT Speed N/A Chassis Fan
  • Asus P9X79 WS | User Manual - Page 121
    il�l�o�p�e��ra��te��a�t��th��e�m��i�n�i�m�u��m� duty cycle. Chassis 1/2/3/4 Q-Fan Control [Enabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature. Chapter 3 ASUS P9X79 WS 3-41
  • Asus P9X79 WS | User Manual - Page 122
    when you set Chassis 1/2/3/4 Fan Profile to [Manual]. Chassis 1/2/3/4 Upper Temperature [70] (in celsius) Use the and keys to set the upper limit of the CPU temperature. The values range from 40°C to 90°C. When the CPU temperature reaches the upper limit, CPU fan will operate at maximum duty
  • Asus P9X79 WS | User Manual - Page 123
    screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Wait For 'F1' If Error [Enabled] [Disabled] Disables this function. [Enabled] The system waits for the key to be pressed when error occurs. Post Report [5 sec] This item appears only when you set
  • Asus P9X79 WS | User Manual - Page 124
    items that appears on the screen depends on the number of devices installed in the system. Select [Disabled] to disallow this function. • To select the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, press after POST. Boot Override
  • Asus P9X79 WS | User Manual - Page 125
    N/A > DIMM_C1 OK > DIMM_C2 N/A > DIMM_D1 OK > DIMM_D2 N/A Monitor Exit Boot Tool Click to enter DRAM SPD information. Status: OK: DRAM is working fine. N/A: DRAM is not installed. Abnormal: DRAM error. Chapter 3 ASUS P9X79 WS 3-45
  • Asus P9X79 WS | User Manual - Page 126
    Label Not Installed Not Installed Not Installed Not Installed Not Installed Not Installed Not Installed Not Installed Save system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/CPU configuration and BIOS
  • Asus P9X79 WS | User Manual - Page 127
    Xpert Device(s) List: SATA6G _E1/ E2 (Navy Blue) While entering setup, BIOS auto detects the presence of SATA devices. Press to display the information of the hard disks which are connected to the SATA6G_E1 and SATA6G_E2 connectors on the motherboard. Chapter 3 ASUS P9X79 WS 3-47
  • Asus P9X79 WS | User Manual - Page 128
    changes. �W�h��e�n�y�o�u� select this option or if you press , a confirmation window appears. Select Yes to discard changes and exit�. ASUS EZ Mode This option allows you to enter the EZ Mode screen. Launch UEFI Shell from filesystem device This option allows you to attempt to launch the UEFI
  • Asus P9X79 WS | User Manual - Page 129
    Service Provider (ISP). Launching ASUS Update After installing AI Suite II from the motherboard support DVD, launch ASUS Update by clicking Update > ASUS Update on the AI Suite II main menu bar. Quit all Windows® applications before you update the BIOS using this utility. Chapter 3 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 130
    download. Click Next. Chapter 3 4. You can decide whether to change the BIOS boot logo, which is the image appearing on screen during the Power‑On Self-Tests (POST). Click Yes if you want to change the boot logo or No to continue. 5. Follow the onscreen instructions to complete the update process
  • Asus P9X79 WS | User Manual - Page 131
    onscreen instructions to complete the update process. • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 132
    EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable floppy disk or an OS‑based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the
  • Asus P9X79 WS | User Manual - Page 133
    system requires you to enter BIOS Setup to recover BIOS setting. To ensure system compatibility and stability, we recommend that you press to load default BIOS values. DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! Chapter 3 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 134
    all SATA hard disk drives (optional). Booting the system in DOS environment 1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port. 2. Boot your computer. When the ASUS Logo appears, press to show the BIOS Boot Device Select Menu. Insert the support DVD
  • Asus P9X79 WS | User Manual - Page 135
    to return to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2011/04/29] Current ROM BOARD: P9X79 WS VER: 0220 DATE: 08/09/2011 PATH: A:\ Update ROM BOARD: Unknown VER: Unknown DATE: Unknown BIOS backup is done! Press any key to continue. Note Saving BIOS: Chapter 3 ASUS P9X79 WS 3-55
  • Asus P9X79 WS | User Manual - Page 136
    updating BIOS. • Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit BIOS menu. See Chaper 3 of your motherboard user manual for details. • Ensure to connect all SATA hard disk drives after updating the BIOS
  • Asus P9X79 WS | User Manual - Page 137
    . • Ensure that you install the Windows® XP Service Pack 3 or later versions before installing the drivers for better compatibility and system stability. 4.2 Support DVD information The support DVD that comes with the motherboard package contains the drivers, software applications, and utilities
  • Asus P9X79 WS | User Manual - Page 138
    support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click on the Manual tab. Click on ASUS Motherboard Utility Guide
  • Asus P9X79 WS | User Manual - Page 139
    in the Tool menu vary with models. • The screeshots of AI Suite II in this user manual are for reference only. The actual screenshots vary with models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P9X79 WS 4-3
  • Asus P9X79 WS | User Manual - Page 140
    4.3.2 TurboV EVO ASUS TurboV EVO introduces TurboV that allows you to manually adjust the CPU frequency and related voltages as well as Auto Tuning function that offers automatic and easy overclocking and system level up. After installing AI Suite II from the motherboard support DVD, launch TurboV
  • Asus P9X79 WS | User Manual - Page 141
    changes immediately • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function in TurboV. Refer to Chapter 3 of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. ASUS P9X79 WS 4-5 Chapter 4
  • Asus P9X79 WS | User Manual - Page 142
    result varies with the CPU model and the system configuration. • To prevent overheating from damaging the motherboard, a better thermal environment is strongly recommended. • Fast Tuning: fast CPU overclocking • Extreme Tuning: extreme overclocking for CPU and memory Using Fast Tuning 1. Click
  • Asus P9X79 WS | User Manual - Page 143
    appears indicating the overclocking process. Click Stop if you want to cancel the Overclocking process. 5. TurboV automatically adjusts and saves BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. ASUS P9X79 WS 4-7
  • Asus P9X79 WS | User Manual - Page 144
    to longer component lifespan and minimize power loss. After installing AI Suite II from the motherboard support DVD, launch DIGI+ Power Control by clicking Tool > extends the overclocking frequency range simultaneously. CPU Power Phase Control Increase phase number under heavy system loading to
  • Asus P9X79 WS | User Manual - Page 145
    system performance or select Optimized for ASUS optimized phase tuning profile to increase DRAM power efficiency. • The actual performance boost may vary depending on your CPU specification. • Do not remove the thermal module. The thermal conditions should be monitored. Chapter 4 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 146
    shift modes automatically according to current system status. You can also customize each mode by configuring settings like CPU frequency, GPU frequency, vCore Voltage, and Fan Control. Launching EPU After installing AI Suite II from the motherboard support DVD, launch EPU by clicking Tool > EPU
  • Asus P9X79 WS | User Manual - Page 147
    fan operation. • Turbo: maximizes the fan speed for the best cooling effect. • User: Allows you to configure the CPU fan profile under certain limitations. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 148
    of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. Launching Probe II After installing AI Suite II from the motherboard support DVD
  • Asus P9X79 WS | User Manual - Page 149
    voltage, temperature, and fan speed on a timeline. The History Record function allows you to designate specific time spans on record to keep track of the three system statuses for certain purposes. Launching Sensor Recorder After installing AI Suite II from the motherboard support DVD, launch Sensor
  • Asus P9X79 WS | User Manual - Page 150
    mode or UASP mode (if UASP is supported by the connected device). 3. You can manually switch the USB 3.0 mode back to Normal mode at any time. Chapter 4 Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. 4-14 Chapter
  • Asus P9X79 WS | User Manual - Page 151
    ASUS SSD Caching After installing AI Suite II from the motherboard support DVD, launch ASUS SSD Caching by clicking Tool > ASUS SSD Caching on the AI Suite II main menu bar. Configuring ASUS SSD Caching 1. Connect one HDD and one SSD to the the Marvell® SATA ports (SATA6G_E1/ E2). ASUS SSD Caching
  • Asus P9X79 WS | User Manual - Page 152
    follow the instructions to complete your request. • Update BIOS from Internet Download the latest BIOS utility from the ASUS service website (www.asus.com) and follow the suggested procedures to update the BIOS version on your system. • Download BIOS from Internet Download the latest BIOS utility
  • Asus P9X79 WS | User Manual - Page 153
    ASUS Update After installing AI Suite II from the motherboard support DVD, launch MyLogo by clicking Update> MyLogo on the AI Suite II main menu bar. Using MyLogo Select the way you would like to do update your boot logo. Then click Next and follow the given instructions. Change the BIOS boot
  • Asus P9X79 WS | User Manual - Page 154
    computer. Change the boot logo of a downloaded BIOS file and update (or do not update) this BIOS to the motherboard 1. At BIOS File, Browse to download the requested BIOS file to your system. This utility will help you detect the compatibility of the BIOS version. 2. Then at Picture File, Browse
  • Asus P9X79 WS | User Manual - Page 155
    Configuration options Set default device buttons Connector settings Exit button Minimize button Control settings window Chapter 4 Information button Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P9X79 WS 4-19
  • Asus P9X79 WS | User Manual - Page 156
    configurations The motherboard supports the following SATA RAID solutions: • Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • Mavell® RAID utility with RAID 0 and RAID 1 support. • You must install Windows® XP Service Pack 3 or later versions before using Serial
  • Asus P9X79 WS | User Manual - Page 157
    Device Model Serial Size Type/Status(Vol ID) 0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk 1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk 2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk 3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk Chapter 4 Select ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 158
    and select the menu options. The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. Creating a RAID set To create a RAID set: 1. From the utility main menu
  • Asus P9X79 WS | User Manual - Page 159
    RAID 0: 128KB RAID 10: 64KB RAID 5: 64KB We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio create the RAID volume and return to the main menu, or to go back to the CREATE VOLUME menu. Chapter 4 ASUS P9X79 WS 4-23
  • Asus P9X79 WS | User Manual - Page 160
    "? (Y/N): 3. Press to delete the RAID set and return to the utility main menu, or press to return to the DELETE VOLUME menu. Exiting the Intel® Rapid Storage Technology Option ROM utility To exit or press to return to the utility main menu. 4-24 Chapter 4: Software support Chapter 4
  • Asus P9X79 WS | User Manual - Page 161
    SPACE: Select F10: Exit/Save ESC: Return 3. Press to select the hard drives to be included in the RAID array. An asterisk (*) appears in front of the selected hard drive. After selecting all the drives needed for the RAID array, press to continue. Chapter 4 ASUS P9X79 WS 4-25
  • Asus P9X79 WS | User Manual - Page 162
    settings. RAID Level: Select a RAID Level. Configuration options: [RAID 0] [RAID 1] [HyperDuo] Stripe Size: Specifies the size of single data block on the virtual disk. In general, a larger stripe size is recommended for applications requiring large data transfers such as audio, video, and graphics
  • Asus P9X79 WS | User Manual - Page 163
    Size : 64K │ └ PD 8: ST3160812AS RAID Mode : RAID0 └ Free Physical Disks Size 304128MB BGA Status : N/A Number of PDs : 2 Members : 0 8 ▶ ▶ Help Delete the selected virtual disk. ENTER: Operation F10: Exit/Save ESC: Return Chapter 4 ASUS P9X79 WS 4-27
  • Asus P9X79 WS | User Manual - Page 164
    the Master Boot Record (MBR) from the selected RAID array. 3. Press . The following warning message appears: Exit Do you want to exit from Marvell BIOS Setup? Yes No Press to save the RAID setting and exit the Marvell RAID utility. Chapter 4 4-28 Chapter 4: Software support
  • Asus P9X79 WS | User Manual - Page 165
    menu, and then click Intel AHCI/RAID Disk to create a RAID driver disk. 5. Select USB floppy disk drive as the destination disk. 6. Follow the succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. Chapter 4 ASUS P9X79 WS 4-29
  • Asus P9X79 WS | User Manual - Page 166
    port or the support DVD into the optical drive, and then click Browse. 3. Click the name of the device you've inserted, go to Drivers > RAID, and then select the RAID driver for the corresponding OS version. Click OK. 4. Follow the succeeding screen instructions to complete the installation. Before
  • Asus P9X79 WS | User Manual - Page 167
    . 4. Click Details tab. The Vendor ID (VID) and Product ID (PID) are displayed. 5. Browse the contents of the RAID driver disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. Chapter 4 ASUS P9X79 WS 4-31
  • Asus P9X79 WS | User Manual - Page 168
    ", "usbstor" Add the same line to both sections. The VID and PID vary with different vendors. 10. Save and exit the file. 4-32 Chapter 4: Software support Chapter 4
  • Asus P9X79 WS | User Manual - Page 169
    Multiple 5GPU This chapter describes how to install and configure multiple ATI® CrossFireX™ and NVIDIA® SLI™ graphics cards. technology support
  • Asus P9X79 WS | User Manual - Page 170
    Chapter summary 5 5.1 ATI® CrossFireX™ technology 5-1 5.2 NVIDIA® SLI™ technology 5-5 5.3 NVIDIA® CUDA™ technology 5-12 ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 171
    that your graphics card driver supports the ATI CrossFireX technology. Download the latest driver from the AMD website (www.amd.com). • Ensure that your power supply unit (PSU) can provide at least the minimum power required by your system. • We recommend that you install additional chassis fans for
  • Asus P9X79 WS | User Manual - Page 172
    Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the
  • Asus P9X79 WS | User Manual - Page 173
    supports the ATI® CrossFireX™ technology. Download the latest driver from the AMD website at www.amd.com. 5.1.5 Enabling the ATI® CrossFireX™ technology After installing your graphics cards and the device drivers, enable the CrossFireX™ feature through the ATI Catalyst™ Control Center in Windows
  • Asus P9X79 WS | User Manual - Page 174
    Center window, click Graphics Settings > CrossFireX > Configure. 2. From the Graphics Adapter list, select the graphics card to act as the display GPU. 3. Select Enable CrossFireX. 1 4. Click Apply, and then click OK to exit the window. 2 3 4 5-4 Chapter 5: Multiple GPU technology support
  • Asus P9X79 WS | User Manual - Page 175
    install additional chassis fans for better thermal environment. • The NVIDIA Triple SLI technology is supported by Windows® Vista™ operating system only. • Visit the NVIDIA zone website at http://www.nzone.com for the latest certified graphics card and supported 3D application list. ASUS P9X79 WS
  • Asus P9X79 WS | User Manual - Page 176
    two SLI-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3. Ensure that the cards are
  • Asus P9X79 WS | User Manual - Page 177
    graphics cards 1. Prepare three SLI-ready graphics cards. 2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation
  • Asus P9X79 WS | User Manual - Page 178
    -ready graphics cards 1. Prepare four SLI-ready graphics cards. 2. Insert the four graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation
  • Asus P9X79 WS | User Manual - Page 179
    to install the device drivers. • Ensure that your PCI Express graphics card driver supports the NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA website at www.nvidia.com. • If you are using a Triple SLI system, ensure to install the NVIDIA® 3-way SLI driver under Windows® Vista
  • Asus P9X79 WS | User Manual - Page 180
    B2. From the Personalization window, select Display Settings. B3. From the Display Settings dialog box, click Advanced Settings. B4. Select the NVIDIA GeForce tab, and then click Start the NVIDIA Control Panel. 5-10 Chapter 5: Multiple GPU technology support
  • Asus P9X79 WS | User Manual - Page 181
    Enable 3-way NVIDIA SLI. When done, click Apply. 2. Select the 3D Settings tab and enable the Show SLI Visual Indicators item. When this item is enabled, a green bar appears on the left side of the screen while 3D demonstrations are rendered, indicating the 3-way SLI status. ASUS P9X79 WS 5-11
  • Asus P9X79 WS | User Manual - Page 182
    .com/object/ cuda_home.html for the latest driver, list of CUDA-certified graphics card and supported 3D application list. 5.3.2 Installing CUDA-ready graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the general
  • Asus P9X79 WS | User Manual - Page 183
    and select Properties from the menu. Click the Hardware tab, and then click Device Manager. Click the "+" sign before Display adapters, and the installed graphics card and computing processor card(s) should appear. The screen differs based on the components you installed. ASUS P9X79 WS 5-13
  • Asus P9X79 WS | User Manual - Page 184
    5-14 Chapter 5: Multiple GPU technology support
  • Asus P9X79 WS | User Manual - Page 185
    CA 94539, USA Telephone +1-812-282-3777 Fax +1-510-608-4555 Web site usa.asus.com Technical Support Telephone Support fax Online support +1-812-282-2787 +1-812-284-0883 support.asus.com ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany
  • Asus P9X79 WS | User Manual - Page 186
    112, TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Motherboard Model name : P9X79 WS conform with the essential requirements of the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
Motherboard
P9X79 WS