Asus P9X79 WS User Manual - Page 51
Internal connectors, Intel, X79 Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_1/2 [gray] - intel x79
View all Asus P9X79 WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2.2.9 Internal connectors 1. Intel® X79 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. ® • These connectors are set to [IDE Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.5.4 SATA Configuration for details. • Before creating a RAID set, refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. • You must load IRST Driver during OS installation for the system to detect the Optical Disk Drive (the ODD should be connected to the SATA_3G port), or else the ODD will not run. ASUS P9X79 WS 2-23