Asus RS300-H8-PS12 User Guide - Page 67
LAN activity LED 2-pin LAN1LINK and 2-pin LAN2LINK
View all Asus RS300-H8-PS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
15. Auxiliary panel connector (20-2 pin AUX_PANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1. Front panel SMB (6-1 pin FPSMB) These leads connect the front panel SMBus cable. 2. LAN activity LED (2-pin LAN1LINK and 2-pin LAN2LINK) These leads are for Gigabit LAN activity LEDs on the front panel. 3. Chassis intrusion (4-1 pin AUX_CHASSIS) These leads are for the intrusion detection feature for chassis with intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to these leads to record a chassis intrusion event. The default setting is short CASEOPEN and GND pin by jumper cap to disable the function. 4. Locator LED (2-pin AUX_LOCLED1 and 2-pin AUX_LOCLED2) These leads are for the Locator LED1 and LED2 on the front panel. Connect the Locator LED cables to these 2-pin connector. The LEDs will light up when the Locator button is pressed. 5. Locator Button/Switch (2-pin AUX_BMCLOCBNT) These leads are for the locator button on the front panel. This button queries the state of the system locator. ASUS RS300-H8-PS12 4-19