Asus SABERTOOTH Z170 MARK 1 User Guide - Page 34
Internal connectors, Intel, Serial ATA 6.0 Gb/s connectors 7-pin SATA6G_56 [black]
View all Asus SABERTOOTH Z170 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 1 1.2.9 Internal connectors 1. Intel® Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_56 [black]; SATAEXPRESS12 [gray]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® Z170 chipset. • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. • Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. 1-18 Chapter 1: Product Introduction
1-18
Chapter 1: Product Introduction
Chapter 1
1.2.9
Internal connectors
1.
Intel
®
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_56 [black];
SATAEXPRESS12 [gray])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
®
Rapid Storage Technology through the onboard Intel
®
Z170 chipset.
•
These connectors are set to [
AHCI Mode
] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to
[
RAID Mode
].
•
Before creating a RAID set, refer to section
5.1 RAID configurations
or the manual
bundled in the motherboard support DVD.