Asus SABERTOOTH Z170 MARK 1 User Guide - Page 98
Onboard Devices Configuration, HD Audio Controller [Enabled], PCI-EX16_3 Bandwidth [Auto]
View all Asus SABERTOOTH Z170 MARK 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
3.6.8 Onboard Devices Configuration Scroll down to view the other BIOS items. Chapter 3 HD Audio Controller [Enabled] This item allows you to use the Azalia High Definition Audio Controller Configuration options: [Disabled] [Enabled] The following items appear only when you set the HD Audio Controller to [Enabled]. Front Panel Type [HD Audio] This item allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. [HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 SPDIF Out Type [SPDIF] [SPDIF] Sets to an SPDIF audio output. [HDMI] Sets to an HDMI audio output. PCI-EX16_3 Bandwidth [Auto] [Auto] Run at X2 mode with SATA6G_56 enabled. [X4 mode] Run at X4 mode for higher performance with SATA6G_56 disabled. M.2 and SATA Express SATA Mode Configuration: [SATA Express_1] [M.2] SATA mode will be switched to M.2. SATA Express can only support PCIE devices. [SATA Express] SATA mode will be switched to SATA Express. M.2 can only support PCIE devices. 3-34 Chapter 3: BIOS Setup