Asus TR-DLS TR-DLS User Manual - Page 62

Power Up Control

Get Asus TR-DLS PDF manuals and user guides View all Asus TR-DLS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

4. BIOS SETUP 4.5.1 Power Up Control 4. BIOS SETUP Power Menu AC PWR Loss Restart [Disabled] This allows you to set whether you want your system to reboot after the power has been interrupted. [Disabled] leaves your system off. [Previous State] reverts your system to the same state before the power interruption. Configuration options: [Disabled] [Previous State] Onboard LAN Power Up [Disabled] Power Up on PCI Card [Disabled] These fields allow you to boot your computer from another computer by sending a wake-up frame or signal to the LAN device, or the PCI modem card if present. Configuration options: [Disabled] [Enabled] IMPORTANT: This feature requires an optional network interface card with WakeOn-LAN feature and an ATX power supply with at least 720mA +5V standby power. Power On By PS/2 Keyboard [Disabled] This parameter allows you to use specific keys on a PS/2 keyboard to turn on the system. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key] IMPORTANT: This feature requires an optional network interface card with WakeOn-LAN feature and an ATX power supply that can supply at least 350mA on the +5VSB lead. You must set the KBPWR jumper to pins 2-3 (5VSB) before you enable this function (refer to page 22 for the jumper location). 62 ASUS TR-DLS User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
ASUS TR-DLS User’s Manual
62
4. BIOS SETUP
4. BIOS SETUP
Power Menu
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the power has
been interrupted. [Disabled]
leaves your system off. [Previous State]
reverts your
system to the same state before the power interruption. Configuration options:
[Disabled] [Previous State]
Onboard LAN Power Up [Disabled]
Power Up on PCI Card [Disabled]
These fields allow you to boot your computer from another computer by sending a
wake-up frame or signal to the LAN device, or the PCI modem card if present.
Configuration options: [Disabled] [Enabled]
4.5.1
Power Up Control
IMPORTANT:
This feature requires an optional network interface card with Wake-
On-LAN feature and an ATX power supply with at least 720mA +5V standby
power.
Power On By PS/2 Keyboard [Disabled]
This parameter allows you to use specific keys on a PS/2 keyboard to turn on the
system. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
IMPORTANT:
This feature requires an optional network interface card with Wake-
On-LAN feature and an ATX power supply that
can supply at least 350mA on the
+5VSB lead.
You must set the KBPWR jumper to pins 2-3 (5VSB) before you enable this function
(refer to page 22 for the jumper location).