Asus TS500-E4 PX4 TS500-E4 - Page 110

5.3.5 IDE Channel 0 Master/Slave; SATA Port 1/2/3/4 Main PhoenixBIOS Setup Utility IDE Channel 0 Master Type: [Auto] Multi-Sector Transfers [Disabled] LBA Mode Control [Disabled] 32-Bit I/O [Disabled] Transfer Mode [Standard] Ultra DMA Mode [Disabled] Item Specific Help User = you enter Paremeters of hard-disk driver installed at this connection. Auto = autotypes hard-disk drive installed here. CD-ROM = a CD-ROM drive is installed here. ATAPI Removable = removable disk drive is installed here. F1 Help ESC Exit ↑↓ Select Item →← Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit Type [Auto] Selects the type of IDE drive. Setting to Auto allows automatic selection of the appropriate IDE device type. Select [CD-ROM] if you are specifically configuring a CD-ROM drive. Select [ATAPI Removable] if your device is either a ZIP, LS-120, or MO drive. Select [User] to manually enter the parameters of the device. Configuration options: [Auto] [User] [Other ATAPI] [IDE Removable] [CD‑ROM] [ATAPI Removable] • Except for 32-Bit I/O item, the following items become user -configurable when the Type item is not set to [Auto]. • For items that have no sub-menu, you have to use -/+ for values changing. Multi-Sector Transfers [Disabled] Enables or disables data multi-sectors transfers. When set to 2~16 Sectors, the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16 Sectors]r LBA Mode Control [Disabled] Enables or disables the LBA mode. Setting to Enabled enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Enabled] 5-16 Chapter 5: BIOS information