Asus TS500-E4 PX4 TS500-E4 - Page 174

6.3.6 Resetting disks to Non-RAID Take caution before you reset a RAID volume hard disk drive to nonRAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive. To reset a RAID set hard disk drive: 1. From the utility main menu, select 3. Reset Disks to Non-RAID, then press to display this screen. [ RESET RAID DATA ] Resetting RAID data will remove internal RAID structures from the selected RAID disks. By removing these structures, the drive will revert back to a non-RAID disk. WARNING: Resetting a disk causes all data on the disk to be lost. Port 0 1 Drive Model Serial # Size Status XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXX XXXXXXXX XX.XGB Member Disk XX.XGB Member Disk Select the disks that should be reset. [↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete 2. Use the up/down arrow key to highlight the RAID set drive you want to reset, then press to select. 3. Press to reset the RAID set drive. A confirmation message appears. 4. Press to reset the drive or press to return to the utility main menu. 5. Follow steps 2 to 4 to select and reset other RAID set drives. 6.3.7 Exiting the Intel® Matrix Storage Manager To exit the utility: 1. From the utility main menu, select 4. Exit, then press . This window appears. [ CONFIRM EXIT ] Are you sure you want to exit? (Y/N): 2. Press to exit or press to return to the utility main menu. 6-38 Chapter 6: RAID configuration